1 | <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
|
---|
2 | <HTML><HEAD><TITLE>Man page of oscam.server</TITLE>
|
---|
3 | </HEAD><BODY>
|
---|
4 | <H1>oscam.server</H1>
|
---|
5 | Section: File Formats (5)<BR><A HREF="#index">Index</A>
|
---|
6 | <A HREF="/cgi-bin/man/man2html">Return to Main Contents</A><HR>
|
---|
7 |
|
---|
8 | <A NAME="lbAB"> </A>
|
---|
9 | <H2>NAME</H2>
|
---|
10 |
|
---|
11 | <B>oscam.server</B> - reader configuration file for OSCam
|
---|
12 | <A NAME="lbAC"> </A>
|
---|
13 | <H2>SYNOPSIS</H2>
|
---|
14 |
|
---|
15 | The server configuration file for OSCam contains reader parameters.
|
---|
16 | sections in <B>oscam.server</B> are <I>recurring</I> (more than one reader possible).
|
---|
17 | At least one [reader] section is <I>required</I>.
|
---|
18 | <A NAME="lbAD"> </A>
|
---|
19 | <H2>DESCRIPTIONS</H2>
|
---|
20 |
|
---|
21 | <A NAME="lbAE"> </A>
|
---|
22 | <H3>The [reader] section</H3>
|
---|
23 |
|
---|
24 | <P>
|
---|
25 |
|
---|
26 | <B>label</B> = <B>name</B>
|
---|
27 | <DL COMPACT><DT><DD>
|
---|
28 | name for reader, <I>required</I>
|
---|
29 | </DL>
|
---|
30 |
|
---|
31 | <P>
|
---|
32 |
|
---|
33 | <B>enable</B> = <B>0</B>|<B>1</B>
|
---|
34 | <DL COMPACT><DT><DD>
|
---|
35 | 0 = deactivate reader, default:1
|
---|
36 | </DL>
|
---|
37 |
|
---|
38 | <P>
|
---|
39 |
|
---|
40 | <B>description</B> = <B>text</B>
|
---|
41 | <DL COMPACT><DT><DD>
|
---|
42 | description of reader, default:none
|
---|
43 | </DL>
|
---|
44 |
|
---|
45 | <P>
|
---|
46 |
|
---|
47 | <B>protocol</B> = <B>reader protocol</B>
|
---|
48 | <DL COMPACT><DT><DD>
|
---|
49 | reader protocol, <I>required</I>:
|
---|
50 | <BR> <B>mouse</B>
|
---|
51 | <BR> <B>mp35</B>
|
---|
52 | <BR> <B>smartreader</B>
|
---|
53 | <BR> <B>internal</B>
|
---|
54 | <BR> <B>serial</B>
|
---|
55 | <BR> <B>camd35</B>|<B>cs357x</B>
|
---|
56 | <BR> <B>cs378x</B>
|
---|
57 | <BR> <B>gbox</B>
|
---|
58 | <BR> <B>newcamd</B>|<B>newcamd525</B>
|
---|
59 | <BR> <B>newcamd524</B>
|
---|
60 | <BR> <B>cccam</B>
|
---|
61 | <BR> <B>radegast</B>
|
---|
62 | <BR> <B>pcsc</B>
|
---|
63 | <BR> <B>constcw</B>
|
---|
64 | <BR> <B>sc8in1</B>
|
---|
65 | </DL>
|
---|
66 |
|
---|
67 | <P>
|
---|
68 |
|
---|
69 | <B>device</B> = <B><device|bus:device|device:slot></B>|Serial:Reader <B>serial</B>|<B><ip|hostname>,<port>[,<lport>]</B>|<B>pcsc</B>|<<B>0|1</B>>|<B>constantcw</B>
|
---|
70 | <DL COMPACT><DT><DD>
|
---|
71 | define local or remote reader
|
---|
72 | <P>
|
---|
73 | <BR> <B>device</B>: device name
|
---|
74 | <P>
|
---|
75 | <BR> <B>bus:device</B>: bus name and device name of the Smartreader+
|
---|
76 | <BR> (get the names with lsusb 'Bus' and 'Device')
|
---|
77 | <P>
|
---|
78 | <BR> <B>device:slot</B>: device name and slot number sc8in1 [1-8]
|
---|
79 | <BR> <I>(only one SC8in1 reader supported)</I>
|
---|
80 | <P>
|
---|
81 | <BR> <B>serial</B> serial number of Smartreader+
|
---|
82 | <BR> (get the serial number while starting OSCam)
|
---|
83 | <P>
|
---|
84 | <BR> <B>port</B>: TCP/IP port
|
---|
85 | <P>
|
---|
86 | <BR> <B>lport</B>: remapping to local TCP/IP port
|
---|
87 | <P>
|
---|
88 | <BR> <B>PCSC</B>: number of PCSC reader, starting with 0
|
---|
89 | <P>
|
---|
90 | <BR> <B>0|1</B>: for Coolstream HD-1 STB only: select reader 0 or
|
---|
91 | <BR> reader 1
|
---|
92 | <P>
|
---|
93 | <BR> <B>constantcw</B>: constant CW file name
|
---|
94 | <P>
|
---|
95 | constant CW file format: CA (4 digits):ID (6 digits):SID (4 digits):PMT PID (4 digits):ECM PID (4 digits)<I>::</I>
|
---|
96 | key (16 Bytes seperated by spaces)
|
---|
97 | <P>
|
---|
98 | example: 1234:123456:1234:1234:1234<I>::</I>00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
|
---|
99 | </DL>
|
---|
100 |
|
---|
101 | <P>
|
---|
102 |
|
---|
103 | <B>detect</B> = <B>CD</B>|<B>DSR</B>|<B>CTS</B>|<B>RING</B>|<B>NONE</B>|<B>gpio[1-7]</B>
|
---|
104 | <DL COMPACT><DT><DD>
|
---|
105 | status detect of card (NONE = no detection), default:CD
|
---|
106 | </DL>
|
---|
107 |
|
---|
108 | <P>
|
---|
109 |
|
---|
110 | <B>cardmhz</B> = <B>mhz</B>
|
---|
111 | <DL COMPACT><DT><DD>
|
---|
112 | set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, for auto clock speed in Dreambox mode set to -1, refer to OVERCLOCKING, default:357
|
---|
113 | </DL>
|
---|
114 |
|
---|
115 | <P>
|
---|
116 |
|
---|
117 | <B>mhz</B> = <B>frequency</B>
|
---|
118 | <DL COMPACT><DT><DD>
|
---|
119 | set reader frequency in units of 10 kHz, if <B>mhz</B> > <B>cardmhz</B> you are in overclocking mode,
|
---|
120 | for <B>cardmhz</B> swiching to MIPSel Dreambox mode set to 2700, for <B>cardmhz</B> swiching to PPC Dreambox mode set to 3150,
|
---|
121 | for <B>cardmhz</B> swiching to Dreambox DM7025 mode set to 8300, refer to OVERCLOCKING, default:357
|
---|
122 | </DL>
|
---|
123 |
|
---|
124 | <P>
|
---|
125 |
|
---|
126 | <B>deprecated</B> = <B>0</B>|<B>1</B>
|
---|
127 | <DL COMPACT><DT><DD>
|
---|
128 | First the SC will be initialized in normal mode. If it fails, the SC will be automatically
|
---|
129 | reverted to deprecated mode, so that the SC speed will not be changed and the communication
|
---|
130 | will remain on normal ATR speed of 9600 baud.
|
---|
131 | <P>
|
---|
132 | 1 = use deprecated SC mode only, default:0
|
---|
133 | </DL>
|
---|
134 |
|
---|
135 | <P>
|
---|
136 |
|
---|
137 | <B>mode</B> = <B>mode</B>
|
---|
138 | <DL COMPACT><DT><DD>
|
---|
139 | set card init mode for AzBox internal reader, default:none
|
---|
140 | </DL>
|
---|
141 |
|
---|
142 | <P>
|
---|
143 |
|
---|
144 | <B>device_out_endpoint</B> = <B>address</B>
|
---|
145 | <DL COMPACT><DT><DD>
|
---|
146 | set endpoint address for FTDI chips,default:0x82
|
---|
147 | <P>
|
---|
148 | <BR> <B>0x81</B>: Infinity USB Smart
|
---|
149 | <BR> <B>0x82</B>: Smartreader+ (default)
|
---|
150 | </DL>
|
---|
151 |
|
---|
152 | <P>
|
---|
153 |
|
---|
154 | <B>smargopatch</B> = <B>0</B>|<B>1</B>
|
---|
155 | <DL COMPACT><DT><DD>
|
---|
156 | 1 = enable workaround for Smartreader+ reader until native mode works, default:0
|
---|
157 | </DL>
|
---|
158 |
|
---|
159 | <P>
|
---|
160 |
|
---|
161 | <B>sc8in1_dtrrts_patch</B> = <B>0</B>|<B>1</B>
|
---|
162 | <DL COMPACT><DT><DD>
|
---|
163 | 1 = enable fix for SC8in1/MCR DTR/RTS kernel bug, default:0
|
---|
164 | </DL>
|
---|
165 |
|
---|
166 | <P>
|
---|
167 |
|
---|
168 | <B>use_gpio</B> = <B>0</B>|<B>1</B>
|
---|
169 | <DL COMPACT><DT><DD>
|
---|
170 | 1 = use GPIO to init the reader. This needs to be set on WRT54G router, default:0
|
---|
171 | </DL>
|
---|
172 |
|
---|
173 | <P>
|
---|
174 |
|
---|
175 | <B>cool_timeout_init</B> = <B>timeout</B>
|
---|
176 | <DL COMPACT><DT><DD>
|
---|
177 | set timeout for SC init in milli-seconds for Coolstream internal reader only, default:50
|
---|
178 | </DL>
|
---|
179 |
|
---|
180 | <P>
|
---|
181 |
|
---|
182 | <B>cool_timeout_after_init</B> = <B>timeout</B>
|
---|
183 | <DL COMPACT><DT><DD>
|
---|
184 | set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150
|
---|
185 | </DL>
|
---|
186 |
|
---|
187 | <P>
|
---|
188 |
|
---|
189 | <B>ins7e</B> = <B>payload</B>
|
---|
190 | <DL COMPACT><DT><DD>
|
---|
191 | add 26 hex-bytes payload for NDS Videoguard 2 SCs, valid for physical readers only, default:none
|
---|
192 | </DL>
|
---|
193 |
|
---|
194 | <P>
|
---|
195 |
|
---|
196 | <B>ins7e11</B> = <B>TA1 byte</B>
|
---|
197 | <DL COMPACT><DT><DD>
|
---|
198 | set TA1 byte for NDS Videoguard 2 SCs, valid for physical readers only, default:none
|
---|
199 | </DL>
|
---|
200 |
|
---|
201 | <P>
|
---|
202 |
|
---|
203 | <B>force_irdeto</B> = <B>0</B>|<B>1</B>
|
---|
204 | <DL COMPACT><DT><DD>
|
---|
205 | 1 = force Irdeto SC mode even if RSA key is set for Irdeto tunnled Nagravion SC, default:0
|
---|
206 | </DL>
|
---|
207 |
|
---|
208 | <P>
|
---|
209 |
|
---|
210 | <B>nagra_read</B> = <B>0</B>|<B>1</B>|<B>2</B>
|
---|
211 | <DL COMPACT><DT><DD>
|
---|
212 | read Nagravison records (on NCMED cards only):
|
---|
213 | <P>
|
---|
214 | <BR> <B>0</B> = disabled (default)
|
---|
215 | <BR> <B>1</B> = read all records with expired rights
|
---|
216 | <BR> <B>2</B> = read records with valid rights only
|
---|
217 | </DL>
|
---|
218 |
|
---|
219 | <P>
|
---|
220 |
|
---|
221 | <B>rsakey</B> = <B>RSA key</B>
|
---|
222 | <DL COMPACT><DT><DD>
|
---|
223 | RSA key for Nagravision/Tiger SCs, CAM key data for Irdeto SCs, Conax SCs, default:none
|
---|
224 | </DL>
|
---|
225 |
|
---|
226 | <P>
|
---|
227 |
|
---|
228 | <B>fix9993</B> = <B>0</B>|<B>1</B>
|
---|
229 | <DL COMPACT><DT><DD>
|
---|
230 | 1 = enable fix for 9993 error with CAID 0919 SCs, default:0
|
---|
231 | </DL>
|
---|
232 |
|
---|
233 | <P>
|
---|
234 |
|
---|
235 | <B>boxkey</B> = <B>box key</B>
|
---|
236 | <DL COMPACT><DT><DD>
|
---|
237 | box key for Nagravision SCs / CAM key for Irdeto SCs
|
---|
238 | </DL>
|
---|
239 |
|
---|
240 | <P>
|
---|
241 |
|
---|
242 | <B>pincode</B> = <B>pincode</B>
|
---|
243 | <DL COMPACT><DT><DD>
|
---|
244 | pincode for Conax and Cryptoworks SCs, default:none
|
---|
245 | </DL>
|
---|
246 |
|
---|
247 | <P>
|
---|
248 |
|
---|
249 | <B>boxid</B> = <B>NDS box ID</B>
|
---|
250 | <DL COMPACT><DT><DD>
|
---|
251 | NDS receiver box id
|
---|
252 | </DL>
|
---|
253 |
|
---|
254 | <P>
|
---|
255 |
|
---|
256 | <B>ndsversion</B> = <B>0</B>|<B>1</B>|<B>12</B>|<B>2</B>
|
---|
257 | <DL COMPACT><DT><DD>
|
---|
258 | set NDS Videoguard version
|
---|
259 | <P>
|
---|
260 | <BR> <B>0</B> = autodetection (default)
|
---|
261 | <BR> <B>1</B> = NDS Videoguard 1
|
---|
262 | <BR> <B>12</B> = NDS Videoguard 1+
|
---|
263 | <BR> <B>2</B> = NDS Videoguard 2
|
---|
264 | </DL>
|
---|
265 |
|
---|
266 | <P>
|
---|
267 |
|
---|
268 | <B>aeskeys</B> = <B>CAID #0</B>@<B>provid</B>:<B>AES key #0 CAID #0</B>[,<B>AES key #1 CAID #0</B>],...[;<B>CAID #1</B>@<B>provid</B>:<B>AES key #0 CAID #1</B>[,<B>AES key #1 CAID #1</B>],...]...
|
---|
269 | <DL COMPACT><DT><DD>
|
---|
270 | multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)
|
---|
271 | <P>
|
---|
272 | special AES keys:
|
---|
273 | <P>
|
---|
274 | <BR> <B>00</B> = do not return any CW, no AES key specified
|
---|
275 | <BR> <B>FF</B> = return CW received from the S, no AES key specified
|
---|
276 | <P>
|
---|
277 | example:
|
---|
278 | <P>
|
---|
279 | <BR> aeskeys = <A HREF="mailto:0500@012345">0500@012345</A>:000102030405060708090a0b0c0d0e0f;<A HREF="mailto:0500@543210">0500@543210</A>:000102030405060708090a0b0c0d0e0f,0,0f0e0d0c0b0a090807060504030201
|
---|
280 | </DL>
|
---|
281 |
|
---|
282 | <P>
|
---|
283 |
|
---|
284 | <B>key</B> = <B>DES key</B>
|
---|
285 | <DL COMPACT><DT><DD>
|
---|
286 | key for newcamd remote reader encryption
|
---|
287 | </DL>
|
---|
288 |
|
---|
289 | <P>
|
---|
290 |
|
---|
291 | <B>account</B> = <B>user,password</B> <I>(delimiter not allowed, obsolete)</I>
|
---|
292 | <DL COMPACT><DT><DD>
|
---|
293 | user and password for remote reader, overrides password of <B>password</B>, first come first serve
|
---|
294 | </DL>
|
---|
295 |
|
---|
296 | <P>
|
---|
297 |
|
---|
298 | <B>user</B> = <B>name</B>
|
---|
299 | <DL COMPACT><DT><DD>
|
---|
300 | user for remote reader, overrides user of <B>account</B>, first come first serve
|
---|
301 | </DL>
|
---|
302 |
|
---|
303 | <P>
|
---|
304 |
|
---|
305 | <B>password</B> = <B>password</B>
|
---|
306 | <DL COMPACT><DT><DD>
|
---|
307 | password for remote reader, overrides password of <B>account</B>, first come first serve
|
---|
308 | </DL>
|
---|
309 |
|
---|
310 | <P>
|
---|
311 |
|
---|
312 | <B>mg-encrypted</B> = D: { <B><IP|hostname></B> { <B><local port></B> <B><remote port></B> { <B><password></B> { <B><level></B> <B><level></B> }}}}[,<B><local MAC address></B>]
|
---|
313 | <DL COMPACT><DT><DD>
|
---|
314 | mgcamd encrypted gbox line, default MAC address = eth0
|
---|
315 | </DL>
|
---|
316 |
|
---|
317 | <P>
|
---|
318 |
|
---|
319 | <B>services</B> = <B>[!]services[,[!]<services>]...</B>
|
---|
320 | <DL COMPACT><DT><DD>
|
---|
321 | reader [de]assignment to service group, default=none
|
---|
322 | </DL>
|
---|
323 |
|
---|
324 | <P>
|
---|
325 |
|
---|
326 | <B>caid</B> = <B><CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...</B>
|
---|
327 | <DL COMPACT><DT><DD>
|
---|
328 | define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF
|
---|
329 | <P>
|
---|
330 | example: caid = 0100
|
---|
331 | <BR> caid = 0200&ffee:0300
|
---|
332 | <BR> caid = 0400&ff00:0500,0600
|
---|
333 | <BR> caid = 0702,0722
|
---|
334 | <BR> caid = 0702&ffdf (shortcut for the example above)
|
---|
335 | </DL>
|
---|
336 |
|
---|
337 | <P>
|
---|
338 |
|
---|
339 | <B>ident</B> = <B><CAID>:<provid>[,provid]...[;<CAID>:<provid>[,provid]...]...</B>
|
---|
340 | <DL COMPACT><DT><DD>
|
---|
341 | set CAID and SC specific ident for reader
|
---|
342 | <P>
|
---|
343 | example: ident = 0100:123456,234567;0200:345678,456789
|
---|
344 | </DL>
|
---|
345 |
|
---|
346 | <P>
|
---|
347 |
|
---|
348 | <B>class</B> = <B>[!]class[,[!]class]...</B>
|
---|
349 | <DL COMPACT><DT><DD>
|
---|
350 | set SC specific class in hex for reader
|
---|
351 | <P>
|
---|
352 | example: class = 01,02,!1b,!2b
|
---|
353 | </DL>
|
---|
354 |
|
---|
355 | <P>
|
---|
356 |
|
---|
357 | <B>chid</B> = <B>CAID:ChID</B>
|
---|
358 | <DL COMPACT><DT><DD>
|
---|
359 | set SC specific ChIDs for reader, default:none
|
---|
360 | <P>
|
---|
361 | example: chid = 0100:12
|
---|
362 | </DL>
|
---|
363 |
|
---|
364 | <P>
|
---|
365 |
|
---|
366 | <B>group</B> = <B>1..64[,1..64]...</B>
|
---|
367 | <DL COMPACT><DT><DD>
|
---|
368 | reader assingment to groups, default:none, <I>required</I>
|
---|
369 | </DL>
|
---|
370 |
|
---|
371 | <P>
|
---|
372 |
|
---|
373 | <B>audisabled</B> = <B>0</B>|<B>1</B>
|
---|
374 | <DL COMPACT><DT><DD>
|
---|
375 | 1 = exclude reader from auto AU, default:0
|
---|
376 | </DL>
|
---|
377 |
|
---|
378 | <P>
|
---|
379 |
|
---|
380 | <B>auprovid</B> = <B>provider ID</B>
|
---|
381 | <DL COMPACT><DT><DD>
|
---|
382 | set provider ID to use the right reader for auto AU
|
---|
383 | <P>
|
---|
384 | example: auprovid = 123456
|
---|
385 | </DL>
|
---|
386 |
|
---|
387 | <P>
|
---|
388 |
|
---|
389 | <B>disableserverfilter</B> = <B>0</B>|<B>1</B>
|
---|
390 | <DL COMPACT><DT><DD>
|
---|
391 | 1 = ignore <B>caid</B> and <B>provid</B> settings of reader due faulty clients, default:0
|
---|
392 | </DL>
|
---|
393 |
|
---|
394 | <P>
|
---|
395 |
|
---|
396 | <B>inactivitytimeout</B> = <B>seconds</B>
|
---|
397 | <DL COMPACT><DT><DD>
|
---|
398 | inactivity timeout for all TCP based remote readers, default:0
|
---|
399 | </DL>
|
---|
400 |
|
---|
401 | <P>
|
---|
402 |
|
---|
403 | <B>reconnecttimeout</B> = <B>seconds</B>
|
---|
404 | <DL COMPACT><DT><DD>
|
---|
405 | reconnect if missing answers for all TCP based remote readers, default:30
|
---|
406 | </DL>
|
---|
407 |
|
---|
408 | <P>
|
---|
409 |
|
---|
410 | <B>fallback</B> = <B>0</B>|<B>1</B>
|
---|
411 | <DL COMPACT><DT><DD>
|
---|
412 | 1 = define reader as fallback, standard and fallback reader must have the same group, default:0
|
---|
413 | </DL>
|
---|
414 |
|
---|
415 | <P>
|
---|
416 |
|
---|
417 | <B>emmcache</B> = <B>usecache,rewrite,logging</B>
|
---|
418 | <DL COMPACT><DT><DD>
|
---|
419 | set EMM cache of local reader:
|
---|
420 | <P>
|
---|
421 | <BR> <B>usecache</B> = <B>0</B>|<B>1</B>: 1 = enable EMM caching, default:0
|
---|
422 | <P>
|
---|
423 | <BR> <B>rewrite</B> = determines how often one and the same EMM is
|
---|
424 | <BR> written, default:0
|
---|
425 | <P>
|
---|
426 | <BR> <B>logging</B> = EMM logging mask:
|
---|
427 | <P>
|
---|
428 | <BR> <B>0</B> = EMM logging disabled (default)
|
---|
429 | <BR> <B>1</B> = logging EMM errors
|
---|
430 | <BR> <B>2</B> = logging written EMMs
|
---|
431 | <BR> <B>4</B> = logging skipped EMMs
|
---|
432 | <BR> <B>8</B> = logging blocked EMMs
|
---|
433 | <BR> <B>16</B> = logging disabled AU
|
---|
434 | <P>
|
---|
435 | <BR> example: emmcache = 1,3,2
|
---|
436 | </DL>
|
---|
437 |
|
---|
438 | <P>
|
---|
439 |
|
---|
440 | <B>cacheex</B> = <B>0</B>|<B>1</B>|<B>2</B>|<B>3</B>
|
---|
441 | <DL COMPACT><DT><DD>
|
---|
442 | set cache exchange mode
|
---|
443 | <P>
|
---|
444 | <BR> <B>0</B>: disable cache exchange mode (default)
|
---|
445 | <BR> <B>1</B>: enable cache exchange pull mode
|
---|
446 | <BR> <B>2</B>: enable cache exchange push mode for camd 3.5x / 3.57x and CCcam
|
---|
447 | <BR> protocol
|
---|
448 | <BR> <B>3</B>: enable reverse cache exchange push mode for camd 3.5x / 3.57x
|
---|
449 | <BR> and CCcam protocol
|
---|
450 | <P>
|
---|
451 | <I>Identical cache exchange modes must be set on local OSCam server and remote OSCam user asccount.</I>
|
---|
452 | <P>
|
---|
453 | <I>Please consider memory consumption.</I>
|
---|
454 | </DL>
|
---|
455 |
|
---|
456 | <P>
|
---|
457 |
|
---|
458 | <B>cacheex_maxhop</B> = <B>hops</B>
|
---|
459 | <DL COMPACT><DT><DD>
|
---|
460 | define maximum hops for cache exchange, default=10
|
---|
461 | </DL>
|
---|
462 |
|
---|
463 | <P>
|
---|
464 |
|
---|
465 | <B>logport</B> = <B>0</B>|<B>port</B>
|
---|
466 | <DL COMPACT><DT><DD>
|
---|
467 | camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading, 0 = disabled, default=0
|
---|
468 | </DL>
|
---|
469 |
|
---|
470 | <P>
|
---|
471 |
|
---|
472 | <B>ecmwhitelist</B> = [<B>CAID</B>[@<B>provid</B>]:]<B>length</B>[,<B>length</B>]...[;[<B>CAID</B>[@<B>provid</B>]:]<B>length</B>[,<B>length</B>]...]...
|
---|
473 | <DL COMPACT><DT><DD>
|
---|
474 | set valid ECM length per CAID and provid in hex, default:none,provid=000000
|
---|
475 | <P>
|
---|
476 | example: ecmwhitelist = 10,20,0a,0b
|
---|
477 | <BR> ecmwhitelist = 0100:10,20;<A HREF="mailto:0200@123456">0200@123456</A>:0a,4b
|
---|
478 | <P>
|
---|
479 | <I>In normal operation mode this parameter is not required.</I>
|
---|
480 | </DL>
|
---|
481 |
|
---|
482 | <P>
|
---|
483 |
|
---|
484 | <B>ratelimitecm</B> = <B>count</B>
|
---|
485 | <DL COMPACT><DT><DD>
|
---|
486 | number of different SIDs in ECMs allowed for an interval, default:0
|
---|
487 | </DL>
|
---|
488 |
|
---|
489 | <P>
|
---|
490 |
|
---|
491 | <B>resetcycle</B> = <B>count</B>
|
---|
492 | <DL COMPACT><DT><DD>
|
---|
493 | number of ECMs until SC reset is performed, 0 = disabled, valid for physical readers only, default:0
|
---|
494 | </DL>
|
---|
495 |
|
---|
496 | <P>
|
---|
497 |
|
---|
498 | <B>ratelimitseconds</B> = <B>seconds</B>
|
---|
499 | <DL COMPACT><DT><DD>
|
---|
500 | interval for rate limit, default:0
|
---|
501 | </DL>
|
---|
502 |
|
---|
503 | <P>
|
---|
504 |
|
---|
505 | <B>cooldown</B> = <B>delay</B>,<B>duration</B>
|
---|
506 | <DL COMPACT><DT><DD>
|
---|
507 | activate ratelimitecm and ratelimitseconds parameters after specified delay for specified duration in seconds, <I>ratelimitecm and ratelimitseconds are required</I>, default:none
|
---|
508 | </DL>
|
---|
509 |
|
---|
510 | <P>
|
---|
511 |
|
---|
512 | <B>blocknano</B> = <B>nano[,nano]...</B>|all
|
---|
513 | <DL COMPACT><DT><DD>
|
---|
514 | list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, valid for physical readers only, default:none
|
---|
515 | <P>
|
---|
516 | <BR> example: blocknano = 45,93,7a,ff
|
---|
517 | <BR> blocknano = all
|
---|
518 | </DL>
|
---|
519 |
|
---|
520 | <P>
|
---|
521 |
|
---|
522 | <B>blockemm-u</B> = <B>0</B>|<B>1</B>
|
---|
523 | <DL COMPACT><DT><DD>
|
---|
524 | 1 = block unique EMMs, default:0
|
---|
525 | </DL>
|
---|
526 |
|
---|
527 | <P>
|
---|
528 |
|
---|
529 | <B>blockemm-s</B> = <B>0</B>|<B>1</B>
|
---|
530 | <DL COMPACT><DT><DD>
|
---|
531 | 1 = block shared EMMs, default:0
|
---|
532 | </DL>
|
---|
533 |
|
---|
534 | <P>
|
---|
535 |
|
---|
536 | <B>blockemm-g</B> = <B>0</B>|<B>1</B>
|
---|
537 | <DL COMPACT><DT><DD>
|
---|
538 | 1 = block global EMMs, default:0
|
---|
539 | </DL>
|
---|
540 |
|
---|
541 | <P>
|
---|
542 |
|
---|
543 | <B>blockemm-unknown</B> = <B>0</B>|<B>1</B>
|
---|
544 | <DL COMPACT><DT><DD>
|
---|
545 | 1 = block unknown types of EMMs, default:0
|
---|
546 | </DL>
|
---|
547 |
|
---|
548 | <P>
|
---|
549 |
|
---|
550 | <B>blockemm-bylen</B> = <B>[length,length]...</B>
|
---|
551 | <DL COMPACT><DT><DD>
|
---|
552 | block all types of EMMs by lenght, maximum 10 values, default:none
|
---|
553 | </DL>
|
---|
554 |
|
---|
555 | <P>
|
---|
556 |
|
---|
557 | <B>saveemm-u</B> = <B>0</B>|<B>1</B>
|
---|
558 | <DL COMPACT><DT><DD>
|
---|
559 | 1 = save unique EMMs to log file, default:0
|
---|
560 | </DL>
|
---|
561 |
|
---|
562 | <P>
|
---|
563 |
|
---|
564 | <B>saveemm-s</B> = <B>0</B>|<B>1</B>
|
---|
565 | <DL COMPACT><DT><DD>
|
---|
566 | 1 = save shared EMMs to log file, default:0
|
---|
567 | </DL>
|
---|
568 |
|
---|
569 | <P>
|
---|
570 |
|
---|
571 | <B>saveemm-g</B> = <B>0</B>|<B>1</B>
|
---|
572 | <DL COMPACT><DT><DD>
|
---|
573 | 1= save global EMMs to log file, default:0
|
---|
574 | </DL>
|
---|
575 |
|
---|
576 | <P>
|
---|
577 |
|
---|
578 | <B>saveemm-unknown</B> = <B>0</B>|<B>1</B>
|
---|
579 | <DL COMPACT><DT><DD>
|
---|
580 | 1 = save unknown types of EMMs to log file, default:0
|
---|
581 | </DL>
|
---|
582 |
|
---|
583 | <P>
|
---|
584 |
|
---|
585 | <B>savenano</B> = <B>nano[,nano]....</B>|all <I>(obsolete)</I>
|
---|
586 | <DL COMPACT><DT><DD>
|
---|
587 | list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only valid for physical readers, default:none
|
---|
588 | <P>
|
---|
589 | <BR> example: savenano = 45,93,7a,ff
|
---|
590 | <BR> savenano = all
|
---|
591 | </DL>
|
---|
592 |
|
---|
593 | <P>
|
---|
594 |
|
---|
595 | <B>readnano</B> = <B>[path]filename</B>
|
---|
596 | <DL COMPACT><DT><DD>
|
---|
597 | write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers, default:none
|
---|
598 | <P>
|
---|
599 | <BR> example: readnano = write.emm
|
---|
600 | <BR> readnano = /var/oscam/write.emm
|
---|
601 | </DL>
|
---|
602 |
|
---|
603 | <P>
|
---|
604 |
|
---|
605 | <B>dropbadcws</B> = <B>0</B>|<B>1</B>
|
---|
606 | <DL COMPACT><DT><DD>
|
---|
607 | 1 = reject bad CWs, send "not found" instead of bad CWs, default:0
|
---|
608 | </DL>
|
---|
609 |
|
---|
610 | <P>
|
---|
611 |
|
---|
612 | <B>disablecrccws</B> = <B>0</B>|<B>1</B>
|
---|
613 | <DL COMPACT><DT><DD>
|
---|
614 | 1 = disable CRC for CW, default: 0
|
---|
615 | <P>
|
---|
616 | <I>In normal operation mode this parameter is not required. Parameter is incompatible with DVB standard.</I>
|
---|
617 | </DL>
|
---|
618 |
|
---|
619 | <P>
|
---|
620 |
|
---|
621 | <B>lb_weight</B> = <B>weight</B>
|
---|
622 | <DL COMPACT><DT><DD>
|
---|
623 | the higher the value the higher the probability for reader selection, default:100
|
---|
624 | <P>
|
---|
625 | <BR> It's an divider for the average responstime.
|
---|
626 | </DL>
|
---|
627 |
|
---|
628 | <P>
|
---|
629 |
|
---|
630 | <B>cccversion</B> = <B><main version>.<version>.<sub version></B>
|
---|
631 | <DL COMPACT><DT><DD>
|
---|
632 | set CCcam version, default:none
|
---|
633 | <P>
|
---|
634 | example: cccversion = 1.2.34
|
---|
635 | </DL>
|
---|
636 |
|
---|
637 | <P>
|
---|
638 |
|
---|
639 | <B>cccmaxhops</B> = <B>hops</B>
|
---|
640 | <DL COMPACT><DT><DD>
|
---|
641 | set CCcam maximum SC distance hops, default:10
|
---|
642 | <P>
|
---|
643 | <BR> <B>-1</B> = disabled
|
---|
644 | <BR> <B>0</B> = remote local SCs only
|
---|
645 | <BR> <B>1</B> = remote local SCs and + 1 hop
|
---|
646 | <BR> <B>2</B> = remote local SCs and + 2 hops
|
---|
647 | <BR> and so on
|
---|
648 | <P>
|
---|
649 | After reading this SC hop will be incremented by one.
|
---|
650 | </DL>
|
---|
651 |
|
---|
652 | <P>
|
---|
653 |
|
---|
654 | <B>ccchop</B> = <B>hop</B>
|
---|
655 | <DL COMPACT><DT><DD>
|
---|
656 | set hop for non CCCam readers, default:0
|
---|
657 | </DL>
|
---|
658 |
|
---|
659 | <P>
|
---|
660 |
|
---|
661 | <B>cccreshare</B> = <B>hop</B>
|
---|
662 | <DL COMPACT><DT><DD>
|
---|
663 | set reader's CCcam reshare hop, default:0
|
---|
664 | <P>
|
---|
665 | <BR> <B>-1</B> = no resharing
|
---|
666 | <BR> <B>x</B> = resharing for direct peer and share level x
|
---|
667 | </DL>
|
---|
668 |
|
---|
669 | <P>
|
---|
670 |
|
---|
671 | <B>cccwantemu</B> = <B>0</B>|<B>1</B>
|
---|
672 | <DL COMPACT><DT><DD>
|
---|
673 | 1 = request to provide emu from CCCam server, too, default:0
|
---|
674 | </DL>
|
---|
675 |
|
---|
676 | <P>
|
---|
677 |
|
---|
678 | <B>ccckeepalive</B> = <B>0</B>|<B>1</B>
|
---|
679 | <DL COMPACT><DT><DD>
|
---|
680 | 1 = send keepalive messages to keep connection to remote CCCam server up, default:0
|
---|
681 | </DL>
|
---|
682 |
|
---|
683 | <P>
|
---|
684 |
|
---|
685 | <B>cccreconnect</B> = <B>timeout</B>
|
---|
686 | <DL COMPACT><DT><DD>
|
---|
687 | reconnect again after ECM request timeout in milli-seconds, default:4000
|
---|
688 | </DL>
|
---|
689 |
|
---|
690 | <P>
|
---|
691 |
|
---|
692 | <B>cccmindown</B> = <B>number</B>
|
---|
693 | <DL COMPACT><DT><DD>
|
---|
694 | filters all readers with hops smaller than number, default:0
|
---|
695 | </DL>
|
---|
696 |
|
---|
697 | <A NAME="lbAF"> </A>
|
---|
698 | <H2>OVERCLOCKING</H2>
|
---|
699 |
|
---|
700 | <DL COMPACT>
|
---|
701 | <DT>•<DD>
|
---|
702 | Dreambox and other internal readers
|
---|
703 | <P>
|
---|
704 | For Dreambox and other internal readers the highest possible clockrate will be
|
---|
705 | auto detected. The <B>mhz</B> parameter lets you override the values chosen by
|
---|
706 | OSCam, if it differs from 357 and 358, but usually you will not set any value
|
---|
707 | for mhz.
|
---|
708 | <P>
|
---|
709 | For certain Dreamboxes (especially PPC clones) the default mhz parameter leads
|
---|
710 | to slow ECM times and/or "not found" ECMs. By setting <B>mhz</B> to values like
|
---|
711 | 200, 300, 400, ... 1600 you can find a value that works for your receiver and
|
---|
712 | your card. The higher the <B>mhz</B> value, the slower the ECM time (strange enough).
|
---|
713 | <P>
|
---|
714 | If you choose the value too low, your card is not recognized (no ATR or "card
|
---|
715 | not supported"). If you choose the value too high, you get slow ECM times. Our
|
---|
716 | experience is that either no <B>mhz</B> line, or a line <B>mhz</B> = 1000 works
|
---|
717 | best.
|
---|
718 | <DT>•<DD>
|
---|
719 | Phoenix / Smartmouse reader
|
---|
720 | <P>
|
---|
721 | Overclocking does not work with Windows and Mac OS X.
|
---|
722 | Set <B>mhz</B> equivalent to the frequency of the reader.
|
---|
723 | OSCam can not set the frequency of the reader.
|
---|
724 | <DT>•<DD>
|
---|
725 | Smargo Smartreader+
|
---|
726 | <P>
|
---|
727 | Set the reader frequency with the native Smargo Smartreader+ tool (srp_tools).
|
---|
728 | Do not set <B>mhz</B> and <B>cardmhz</B>.
|
---|
729 | </DL>
|
---|
730 | <P>
|
---|
731 |
|
---|
732 | OSCam tries to set the baudrate automatically.
|
---|
733 | A standard serial port has limited baudrate settings, so SC overclocking might not work.
|
---|
734 | When using a serial reader the best way for overclocking is connecting it to a FTDI based USB to serial port adapter.
|
---|
735 | <P>
|
---|
736 | If overclocking does not work, verify the effective baudrate in the logfile.
|
---|
737 | If it deviates too much from the requested baudrate, the SC will not be recognized (no ATR)
|
---|
738 | and the value for <B>mhz</B> should be adjusted again.
|
---|
739 | The higher the baudrate, the more accurate the effective baudrate can be.
|
---|
740 | <A NAME="lbAG"> </A>
|
---|
741 | <H2>CACHE EXCHANGE</H2>
|
---|
742 |
|
---|
743 | <DL COMPACT>
|
---|
744 | <DT>•<DD>
|
---|
745 | pull mode (on request: cache exchange from remote to local OSCam)
|
---|
746 | <P>
|
---|
747 | ECM requests will be forwarded to the remote cache exchange partner. If the CW
|
---|
748 | could not be found in the cache of the remote exchange partner, a not found
|
---|
749 | will be answered. If the CW could not be found in the cache of the remote
|
---|
750 | exchange partner but a pending ECM request is open, the request will be
|
---|
751 | re-initiated after the wait time defined in <B>cacheexwaittime</B>.
|
---|
752 | <DT>•<DD>
|
---|
753 | push mode (continuous: cache exchange from remote to local OSCam)
|
---|
754 | <P>
|
---|
755 | CWs from the remote cache exchange partner will be forwarded to the local
|
---|
756 | cache. Forwarding only works while the camd camd 3.5x / 3.57x or CCcam
|
---|
757 | protocol connection between the local and remote OSCam has been established.
|
---|
758 | <DT>•<DD>
|
---|
759 | reverse push mode (continuous: cache exchange from local to remote OSCam)
|
---|
760 | <P>
|
---|
761 | CWs from the local cache will be forwarded to the remote cache exchange
|
---|
762 | partner. Forwarding only works while the camd camd 3.5x / 3.57x or CCcam
|
---|
763 | protocol connection between the remote and local OSCam has been established.
|
---|
764 | </DL>
|
---|
765 | <A NAME="lbAH"> </A>
|
---|
766 | <H2>EXAMPLES</H2>
|
---|
767 |
|
---|
768 | <DL COMPACT>
|
---|
769 | <DT>•<DD>
|
---|
770 | serial mouse compatible reader
|
---|
771 | <BR>
|
---|
772 | <BR> [reader]
|
---|
773 | <BR> label = myserialmousereader
|
---|
774 | <BR> detect = cd
|
---|
775 | <BR> protocol = mouse
|
---|
776 | <BR> device = /dev/ttyS1
|
---|
777 | <BR> group = 1
|
---|
778 | <BR> caid = 0100
|
---|
779 | <BR> services = myservice,!thisservice
|
---|
780 | <DT>•<DD>
|
---|
781 | USB mouse compatible reader
|
---|
782 | <BR>
|
---|
783 | <BR> [reader]
|
---|
784 | <BR> label = myusbmousereader
|
---|
785 | <BR> detect = cd
|
---|
786 | <BR> protocol = mouse
|
---|
787 | <BR> device = /dev/ttyUSB0
|
---|
788 | <BR> aeskey = 0102030405060708090a0b0c0d0e0f10
|
---|
789 | <BR> group = 2
|
---|
790 | <BR> caid = 0200
|
---|
791 | <DT>•<DD>
|
---|
792 | camd 3.78x reader
|
---|
793 | <BR>
|
---|
794 | <BR> [reader]
|
---|
795 | <BR> label = mycamd378xreader
|
---|
796 | <BR> protocol = cs378x
|
---|
797 | <BR> device = 192.168.0.1,1234
|
---|
798 | <BR> user = user1
|
---|
799 | <BR> password = password1
|
---|
800 | <BR> group = 3
|
---|
801 | <DT>•<DD>
|
---|
802 | newcamd reader
|
---|
803 | <BR>
|
---|
804 | <BR> [reader]
|
---|
805 | <BR> label = mynewcamdreader
|
---|
806 | <BR> protocol = newcamd
|
---|
807 | <BR> key = 0102030405060708091011121314
|
---|
808 | <BR> device = 192.168.0.2,2345
|
---|
809 | <BR> user = user2
|
---|
810 | <BR> password = password2
|
---|
811 | <BR> group = 4
|
---|
812 | <DT>•<DD>
|
---|
813 | CCcam reader
|
---|
814 | <BR>
|
---|
815 | <BR> [reader]
|
---|
816 | <BR> label = mycccamreader
|
---|
817 | <BR> protocol = cccam
|
---|
818 | <BR> device = 192.168.0.3,3456
|
---|
819 | <BR> user = user3
|
---|
820 | <BR> password = password3
|
---|
821 | <BR> group = 5
|
---|
822 | <BR> caid = 0300,0400,0500
|
---|
823 | <BR> cccversion = 1.2.3
|
---|
824 | <DT>•<DD>
|
---|
825 | PCSC reader
|
---|
826 | <P>
|
---|
827 | <BR> [reader]
|
---|
828 | <BR> label = mypcscreader
|
---|
829 | <BR> protocol = pcsc
|
---|
830 | <BR> device = 0
|
---|
831 | <BR> aeskey = 0102030405060708090a0b0c0d0e0f10
|
---|
832 | <BR> group = 6
|
---|
833 | <BR> caid = 0600
|
---|
834 | <DT>•<DD>
|
---|
835 | Smargo Smartreader+
|
---|
836 | <P>
|
---|
837 | <BR> [reader]
|
---|
838 | <BR> label = mysmartreader
|
---|
839 | <BR> protocol = smartreader
|
---|
840 | <BR> device = 001:002
|
---|
841 | <BR> aeskey = 0102030405060708090a0b0c0d0e0f10
|
---|
842 | <BR> group = 7
|
---|
843 | <BR> caid = 0700
|
---|
844 | <DT>•<DD>
|
---|
845 | internal reader
|
---|
846 | <P>
|
---|
847 | <BR> [reader]
|
---|
848 | <BR> label = myinternalreader
|
---|
849 | <BR> protocol = internal
|
---|
850 | <BR> device = /dev/sci0
|
---|
851 | <BR> group = 8
|
---|
852 | <BR> caid = 0800
|
---|
853 | <DT>•<DD>
|
---|
854 | sc8in1 reader
|
---|
855 | <P>
|
---|
856 | <BR> [reader]
|
---|
857 | <BR> label = mysc8in1reader
|
---|
858 | <BR> protocol = sc8in1
|
---|
859 | <BR> device = /dev/ttyUSB0:1
|
---|
860 | <BR> group = 9
|
---|
861 | <BR> caid = 0900
|
---|
862 | <DT>•<DD>
|
---|
863 | constant CW
|
---|
864 | <P>
|
---|
865 | <BR> [reader]
|
---|
866 | <BR> label = myconstantcw
|
---|
867 | <BR> protocol = constcw
|
---|
868 | <BR> device = /var/keys/constant.cw
|
---|
869 | <BR> group = 10
|
---|
870 | <DT>•<DD>
|
---|
871 | gbox reader
|
---|
872 | <P>
|
---|
873 | <BR> [reader]
|
---|
874 | <BR> label = mygboxreader
|
---|
875 | <BR> protocol = gbox
|
---|
876 | <BR> device = 192.168.0.4,45678,56789
|
---|
877 | <BR> user = user4
|
---|
878 | <BR> password = password4
|
---|
879 | <BR> group = 11
|
---|
880 | <BR> caid = 1100
|
---|
881 | </DL>
|
---|
882 | <A NAME="lbAI"> </A>
|
---|
883 | <H2>SEE ALSO</H2>
|
---|
884 |
|
---|
885 | <B><A HREF="/cgi-bin/man/man2html?1+list_smargo">list_smargo</A></B>(1), <B><A HREF="/cgi-bin/man/man2html?1+oscam">oscam</A></B>(1), <B><A HREF="/cgi-bin/man/man2html?5+oscam.ac">oscam.ac</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.cacheex">oscam.cacheex</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.cert">oscam.cert</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.conf">oscam.conf</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.dvbapi">oscam.dvbapi</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.guess">oscam.guess</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.ird">oscam.ird</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.provid">oscam.provid</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.services">oscam.services</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.srvid">oscam.srvid</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.tiers">oscam.tiers</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.user">oscam.user</A></B>(5), <B><A HREF="/cgi-bin/man/man2html?5+oscam.whitelist">oscam.whitelist</A></B>(5)
|
---|
886 | <P>
|
---|
887 |
|
---|
888 | <HR>
|
---|
889 | <A NAME="index"> </A><H2>Index</H2>
|
---|
890 | <DL>
|
---|
891 | <DT><A HREF="#lbAB">NAME</A><DD>
|
---|
892 | <DT><A HREF="#lbAC">SYNOPSIS</A><DD>
|
---|
893 | <DT><A HREF="#lbAD">DESCRIPTIONS</A><DD>
|
---|
894 | <DL>
|
---|
895 | <DT><A HREF="#lbAE">The [reader] section</A><DD>
|
---|
896 | </DL>
|
---|
897 | <DT><A HREF="#lbAF">OVERCLOCKING</A><DD>
|
---|
898 | <DT><A HREF="#lbAG">CACHE EXCHANGE</A><DD>
|
---|
899 | <DT><A HREF="#lbAH">EXAMPLES</A><DD>
|
---|
900 | <DT><A HREF="#lbAI">SEE ALSO</A><DD>
|
---|
901 | </DL>
|
---|
902 | </BODY>
|
---|
903 | </HTML>
|
---|