Changeset 6077
- Timestamp:
- 12/12/11 20:08:06 (12 years ago)
- Location:
- trunk/Distribution/doc
- Files:
-
- 6 edited
Legend:
- Unmodified
- Added
- Removed
-
trunk/Distribution/doc/html/oscam.server.5.html
r6065 r6077 161 161 <B>cacheex</B> = <B>0</B>|<B>1</B> 162 162 <DL COMPACT><DT><DD> 163 1 = enable cache exchange, default:0 164 <P> 165 <I>Cache exchange must be enabled on local and remote OSCam reader.</I> 163 set cache exchange mode, default:0 164 <P> 165 <BR> <B>1</B>: enable cache pull mode 166 <BR> <B>2</B>: enable cache push mode for camd 3.5x protocol 167 <P> 168 <I>Identical cache exchange modes must be set on local and remote OSCam reader.</I> 166 169 </DL> 167 170 -
trunk/Distribution/doc/html/oscam.user.5.html
r6039 r6077 83 83 <B>cacheex</B> = <B>0</B>|<B>1</B> 84 84 <DL COMPACT><DT><DD> 85 1 = enable cache exchange, default:0 86 <P> 87 <I>Cache exchange must be enabled on local and remote OSCam reader.</I> 85 set cache exchange mode, default:0 86 <P> 87 <BR> <B>1</B>: enable cache pull mode 88 <BR> <B>2</B>: enable cache push mode for camd 3.5x protocol 89 <P> 90 <I>Identical cache exchange modes must be set on local and remote OSCam reader.</I> 88 91 </DL> 89 92 -
trunk/Distribution/doc/man/oscam.server.5
r6065 r6077 116 116 \fBcacheex\fP = \fB0\fP|\fB1\fP 117 117 .RS 3n 118 1 = enable cache exchange, default:0 119 120 \fICache exchange must be enabled on local and remote OSCam reader.\fR 118 set cache exchange mode, default:0 119 120 \fB1\fP: enable cache pull mode 121 \fB2\fP: enable cache push mode for camd 3.5x protocol 122 123 \fIIdentical cache exchange modes must be set on local and remote OSCam reader.\fR 121 124 .RE 122 125 .PP -
trunk/Distribution/doc/man/oscam.user.5
r6039 r6077 56 56 \fBcacheex\fP = \fB0\fP|\fB1\fP 57 57 .RS 3n 58 1 = enable cache exchange, default:0 59 60 \fICache exchange must be enabled on local and remote OSCam reader.\fR 58 set cache exchange mode, default:0 59 60 \fB1\fP: enable cache pull mode 61 \fB2\fP: enable cache push mode for camd 3.5x protocol 62 63 \fIIdentical cache exchange modes must be set on local and remote OSCam reader.\fR 61 64 .RE 62 65 .PP -
trunk/Distribution/doc/txt/oscam.server.txt
r6065 r6077 1 oscam.server(5) 1 oscam.server(5) oscam.server(5) 2 2 3 3 … … 7 7 8 8 SYNOPSIS 9 The server configuration file for OSCam contains reader parameters. sections in oscam.server are recurring10 (more than one reader possible). At least one [reader] section is required.9 The server configuration file for OSCam contains reader parameters. sections in oscam.server are 10 recurring (more than one reader possible). At least one [reader] section is required. 11 11 12 12 DESCRIPTIONS 13 13 The [reader] section 14 device = <device|bus:device|device:slot>|Serial:Reader serial|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>|con‐15 stantcw14 device = <device|bus:device|device:slot>|Serial:Reader serial|<ip|host‐ 15 name>,<port>[,<lport>]|pcsc|<0|1>|constantcw 16 16 define local or remote reader 17 17 … … 38 38 constantcw: constant CW file name 39 39 40 constant CW file format: CA (4 digits):ID (6 digits):SID (4 digits):PMT PID (4 digits):ECM PID (4 digits)::41 key (16 Bytes seperated by spaces)40 constant CW file format: CA (4 digits):ID (6 digits):SID (4 digits):PMT PID (4 digits):ECM PID (4 41 digits):: key (16 Bytes seperated by spaces) 42 42 43 43 example: 1234:123456:1234:1234:1234::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F … … 64 64 password for remote reader, overrides password of account, first come first serve 65 65 66 mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC67 address>]66 mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> 67 }}}}[,<local MAC address>] 68 68 mgcamd encrypted gbox line, default MAC address = eth0 69 69 … … 90 90 91 91 cacheex = 0|1 92 1 = enable cache exchange, default:0 93 94 Cache exchange must be enabled on local and remote OSCam reader. 92 set cache exchange mode, default:0 93 94 1: enable cache pull mode 95 2: enable cache push mode for camd 3.5x protocol 96 97 Identical cache exchange modes must be set on local and remote OSCam reader. 95 98 96 99 logport = 0|port 97 camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascad ing, 0 =98 disabled, default=0100 camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascad‐ 101 ing, 0 = disabled, default=0 99 102 100 103 caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]... … … 127 130 128 131 cardmhz = mhz 129 set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to OVERCLOCKING, default:357 132 set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to OVERCLOCKING, 133 default:357 130 134 131 135 mhz = frequency 132 set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to OVERCLOCK‐133 ING, default:357136 set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to 137 OVERCLOCKING, default:357 134 138 135 139 deprecated = 0|1 136 First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to dep‐137 recated mode, so that the SC speed will not be changed and the communication will remain on normal ATR138 speed of 9600 baud.140 First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted 141 to deprecated mode, so that the SC speed will not be changed and the communication will remain on 142 normal ATR speed of 9600 baud. 139 143 140 144 1 = use deprecated SC mode only, default:0 … … 203 207 204 208 cooldown = delay,duration 205 activate ratelimitecm and ratelimitseconds parameters after specified delay for specified duration in sec‐206 onds, ratelimitecm and ratelimitseconds are required, default:none209 activate ratelimitecm and ratelimitseconds parameters after specified delay for specified duration 210 in seconds, ratelimitecm and ratelimitseconds are required, default:none 207 211 208 212 blocknano = nano[,nano]...|all 209 list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, valid for physical readers only, default:none 213 list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, valid for physical readers only, 214 default:none 210 215 211 216 example: blocknano = 45,93,7a,ff … … 240 245 241 246 savenano = nano[,nano]....|all (obsolete) 242 list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only valid for physical readers, default:none 247 list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only valid for physical readers, 248 default:none 243 249 244 250 example: savenano = 45,93,7a,ff … … 246 252 247 253 readnano = [path]filename 248 write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the249 specified file is searched for in the configuration directory, only valid for physicalreaders,254 write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, 255 the specified file is searched for in the configuration directory, only valid for physical readers, 250 256 default:none 251 257 … … 259 265 1 = disable CRC for CW, default: 0 260 266 261 In normal operation mode this parameter is not required. Parameter is incompatible with DVB standard. 267 In normal operation mode this parameter is not required. Parameter is incompatible with DVB stan‐ 268 dard. 262 269 263 270 lb_weight = weight … … 333 340 box key for Nagravision SCs / CAM key for Irdeto SCs 334 341 335 aeskeys = CAID #0@ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident:AES key #0 CAID #1[,AES key336 #1 CAID #1],...]...337 multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2338 nano of the ECM)342 aeskeys = CAID #0@ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident:AES key #0 CAID 343 #1[,AES key #1 CAID #1],...]... 344 multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through 345 the D2 nano of the ECM) 339 346 340 347 special AES keys: … … 345 352 example: 346 353 347 aeskeys 354 aeskeys = 348 355 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:000102030405060708090a0b0c0d0e0f,0,0f0e0d0c0b0a090807060504030201 349 356 … … 365 372 · Dreambox and other internal readers 366 373 367 For Dreambox and other internal readers the highest possible clockrate will be auto detected. The mhz 368 parameter lets you override the values chosen by OSCam, if it differs from 357 and 358, but usually you 369 will not set any value for mhz. 370 371 For certain Dreamboxes (especially PPC clones) the default mhz parameter leads to slow ECM times and/or 372 "not found" ECMs. By setting mhz to values like 200, 300, 400, ... 1600 you can find a value that works for 373 your receiver and your card. The higher the mhz value, the slower the ECM time (strange enough). 374 375 If you choose the value too low, your card is not recognized (no ATR or "card not supported"). If you 376 choose the value too high, you get slow ECM times. Our experience is that either no mhz line, or a line mhz 377 = 1000 works best. 374 For Dreambox and other internal readers the highest possible clockrate will be auto detected. The 375 mhz parameter lets you override the values chosen by OSCam, if it differs from 357 and 358, but usu‐ 376 ally you will not set any value for mhz. 377 378 For certain Dreamboxes (especially PPC clones) the default mhz parameter leads to slow ECM times 379 and/or "not found" ECMs. By setting mhz to values like 200, 300, 400, ... 1600 you can find a value 380 that works for your receiver and your card. The higher the mhz value, the slower the ECM time 381 (strange enough). 382 383 If you choose the value too low, your card is not recognized (no ATR or "card not supported"). If 384 you choose the value too high, you get slow ECM times. Our experience is that either no mhz line, or 385 a line mhz = 1000 works best. 378 386 379 387 · Phoenix / Smartmouse reader 380 388 381 Overclocking does not work with Windows and Mac OS X. Set mhz equivalent to the frequency of the reader.382 OSCam can not set the frequency of the reader.389 Overclocking does not work with Windows and Mac OS X. Set mhz equivalent to the frequency of the 390 reader. OSCam can not set the frequency of the reader. 383 391 384 392 · Smargo Smartreader+ 385 393 386 Set the reader frequency with the native Smargo Smartreader+ tool (srp_tools). Do not set mhz and cardmhz. 387 388 OSCam tries to set the baudrate automatically. A standard serial port has limited baudrate settings, so SC 389 overclocking might not work. When using a serial reader the best way for overclocking is connecting it to a 390 FTDI based USB to serial port adapter. 391 392 If overclocking does not work, verify the effective baudrate in the logfile. If it deviates too much from the 393 requested baudrate, the SC will not be recognized (no ATR) and the value for mhz should be adjusted again. 394 The higher the baudrate, the more accurate the effective baudrate can be. 394 Set the reader frequency with the native Smargo Smartreader+ tool (srp_tools). Do not set mhz and 395 cardmhz. 396 397 OSCam tries to set the baudrate automatically. A standard serial port has limited baudrate settings, 398 so SC overclocking might not work. When using a serial reader the best way for overclocking is con‐ 399 necting it to a FTDI based USB to serial port adapter. 400 401 If overclocking does not work, verify the effective baudrate in the logfile. If it deviates too much 402 from the requested baudrate, the SC will not be recognized (no ATR) and the value for mhz should be 403 adjusted again. The higher the baudrate, the more accurate the effective baudrate can be. 395 404 396 405 EXAMPLES … … 508 517 509 518 SEE ALSO 510 list_smargo(1), oscam(1), oscam.ac(5), oscam.cert(5), oscam.conf(5), oscam.dvbapi(5),oscam.guess(5),519 list_smargo(1), oscam(1), oscam.ac(5), oscam.cert(5), oscam.conf(5), oscam.dvbapi(5), oscam.guess(5), 511 520 oscam.ird(5), oscam.provid(5), oscam.services(5), oscam.srvid(5), oscam.tiers(5), oscam.user(5) 512 521 513 522 514 523 515 524 oscam.server(5) -
trunk/Distribution/doc/txt/oscam.user.txt
r6039 r6077 1 oscam.user(5) 1 oscam.user(5) oscam.user(5) 2 2 3 3 … … 7 7 8 8 SYNOPSIS 9 The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recur‐10 r ing (more than one account).9 The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are 10 recurring (more than one account). 11 11 12 12 DESCRIPTIONS … … 25 25 26 26 betatunnel = <CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]... 27 define Betacrypt tunneling (maximum see CS_MAXTUNTAB in globals.h). The ServiceID can also be used for28 wildcarded CAIDs.27 define Betacrypt tunneling (maximum see CS_MAXTUNTAB in globals.h). The ServiceID can also be used 28 for wildcarded CAIDs. 29 29 30 30 example: betatunnel = 0100.0001:0200,0300.0004:0500 … … 46 46 47 47 cacheex = 0|1 48 1 = enable cache exchange, default:048 set cache exchange mode, default:0 49 49 50 Cache exchange must be enabled on local and remote OSCam reader. 50 1: enable cache pull mode 51 2: enable cache push mode for camd 3.5x protocol 52 53 Identical cache exchange modes must be set on local and remote OSCam reader. 51 54 52 55 sleep = minutes … … 54 57 55 58 sleepsend = 0|255 56 255 = OSCam client only: stopping requests until next zap, 255 = camd 3.x only: stopping requests until57 restart of camd 3.x client, default:059 255 = OSCam client only: stopping requests until next zap, 255 = camd 3.x only: stopping requests 60 until restart of camd 3.x client, default:0 58 61 59 62 caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:<target CAID>]]... … … 109 112 1 = account disabled, default:0 110 113 111 allowedprotocols = [camd33][,][camd35][,][cs357x][,][cs378x][,][newcamd][,][cccam][,][gbox][,][radegast] 114 allowedprotocols = [camd33][,][camd35][,][cs357x][,][cs378x][,][newcamd][,][cccam][,][gbox][,][rade‐ 115 gast] 112 116 list of all allowed connection protocols, default:all connection protocols 113 117 … … 134 138 135 139 suppresscmd08 = 0|1 136 0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for rejected CAID, service ID and provider137 ID combination, 1 =disable, default:0140 0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for rejected CAID, service ID and 141 provider ID combination, 1 = disable, default:0 138 142 139 143 keepalive = 0|1 … … 184 188 185 189 SEE ALSO 186 list_smargo(1), oscam(1), oscam.ac(5), oscam.cert(5),oscam.conf(5), oscam.dvbapi(5), oscam.guess(5),190 list_smargo(1), oscam(1), oscam.ac(5), oscam.cert(5), oscam.conf(5), oscam.dvbapi(5), oscam.guess(5), 187 191 oscam.ird(5), oscam.provid(5), oscam.server(5), oscam.services(5), oscam.tiers(5), oscam.srvid(5) 188 192 189 193 190 194 191 195 oscam.user(5)
Note:
See TracChangeset
for help on using the changeset viewer.