Opened 13 years ago

Closed 13 years ago

#1993 closed defect (invalid)

Clients via newcamd (N lines) not connecting to new revision of oscam

Reported by: xfiles_2007 Owned by:
Priority: critical Component: Protocol - Newcamd
Severity: high Keywords:
Cc: Sensitive: no

Description

Revision

5544

Issue Description

Clients via newcamd/cccam not connecting to new revision of oscam (Ubuntu 11.04 PC system). Packets seem to be getting lost.

When the issue occurs

How the issue is reproducable

  1. Compile the new revision of Oscam in Ubuntu 11.04
  2. Setup the config files.
  3. Test the connection from any reciever to the Oscam server and notice that no connections occur.

Change History (14)

comment:1 by xfiles_2007, 13 years ago

Component: Please fill inProtocol - Newcamd
Priority: Please fill incritical
Severity: Please fill inhigh

comment:2 by pooyair, 13 years ago

which rev this problem starts? (which one is last working?)

comment:3 by Deas, 13 years ago

Resolution: invalid
Status: newclosed

no log => closed.

btw.: i have a few mgcamd clients with newcamd connected to my server. and they all work with the latest version. so i´m sure this is a config issue on your side. oscam does not loose packets - faulty network hardware or overloaded hub´s can loose packets.

discuss this in the forum first. this is a ticket system for confirmed bugs!

comment:4 by lareq78, 13 years ago

Resolution: invalid
Status: closedreopened

@xfiles_2007

did some change in r5545
please test with latest rev,

Last edited 13 years ago by lareq78 (previous) (diff)

comment:5 by xfiles_2007, 13 years ago

stable v v 1.0 is fine with the Exact same config . I will check the latest and report tonite .I don't believe it's a network routing issue since the stable version is fine.

comment:6 by pooyair, 13 years ago

@Deas

no log => closed

we have 3 tickets #1959 , #1981 , #1993 in this case , so i think should be more patient on tickets , sometimes nothing would written in log, so logs always could not helps .
Best Regards

@xfiles_2007
if log could not provided by u , u could determine which rev this starts. (since devs not have all hardwares ,.. to reproduce it ) there are only 4 revs u might check which is before newcamd change sets . to figure out which rev is last working so please test these :

latest rev, r5298 , r5225 , r5204 ,

Last edited 13 years ago by pooyair (previous) (diff)

comment:7 by lareq78, 13 years ago

@xfiles_2007
since log could not provided also mgcamd users could connect with newcamd protocol, finding last rev as pooyair said could helps,
r5205 looks suspicious to me ,so guess the last working might be r5204 for u , could u confirm it

Last edited 13 years ago by lareq78 (previous) (diff)

comment:8 by xfiles_2007, 13 years ago

Latest rev doesnt work ..same issue on Ubuntu 11.04 , pc installation.

Not sure if the below will help.

Rev 5554

Warning: keyword 'build' in cccam section not recognized
2011/07/06 7:42:24 B77326C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5554 (i686-pc-linux)
2011/07/06 7:42:24 B77326C0 s version=1.00-unstable_svn, build #5554, system=i686-pc-linux, nice=-1
2011/07/06 7:42:24 B77326C0 s client max. idle=120 sec, debug level=0
2011/07/06 7:42:24 B77326C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/07/06 7:42:24 B77326C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 7:42:24 B77326C0 s Cannot open file "config/oscam.services" (errno=2 No such file or directory)
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
2011/07/06 7:42:24 B77326C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/06 7:42:24 B77326C0 s signal handling initialized (type=sysv)
2011/07/06 7:42:24 B77326C0 s 1072 service-id's loaded in 10ms
2011/07/06 7:42:24 B77326C0 s can't open file "config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/07/06 7:42:24 B77326C0 s 6 provid's loaded
2011/07/06 7:42:24 B77326C0 s can't open file "config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/07/06 7:42:24 B77326C0 s monitor: disabled
2011/07/06 7:42:24 B77326C0 s camd33: disabled
2011/07/06 7:42:24 B77326C0 s camd35: disabled
2011/07/06 7:42:24 B77326C0 s cs378x: disabled
2011/07/06 7:42:24 B77326C0 s newcamd: initialized (fd=6, port=4401, crypted)
2011/07/06 7:42:24 B77326C0 s CAID: 0604
2011/07/06 7:42:24 B77326C0 s provid #0: 000000
2011/07/06 7:42:24 B77326C0 s cccam: initialized (fd=7, port=45418, crypted)
2011/07/06 7:42:24 B77326C0 s radegast: disabled
2011/07/06 7:42:24 B77326C0 s http thread started
2011/07/06 7:42:24 B77326C0 s creating thread for device /dev/ttyUSB0

comment:9 by lareq78, 13 years ago

no this log could not help , please read my last post here.
regards

comment:10 by xfiles_2007, 13 years ago

Ok well :

5204 same issue , doesnt work
5225 same issue, doesnt work
5000 same issue, doesnt work
4500 same issue, doesnt work
4000 WORKS!!!!!

so there has been a problem somewhere and im suprised no one has picked it up ??


Warning: keyword 'build' in cccam section not recognized
2011/07/06 8:11:48 B77AD6C0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4000 (i686-pc-linux)
2011/07/06 8:11:48 B77AD6C0 s version=1.00-unstable_svn, build #4000, system=i686-pc-linux, nice=-1
2011/07/06 8:11:48 B77AD6C0 s client max. idle=120 sec, debug level=0
2011/07/06 8:11:48 B77AD6C0 s max. logsize=unlimited
2011/07/06 8:11:48 B77AD6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 8:11:48 B77AD6C0 s auth size=4788
2011/07/06 8:11:48 B77AD6C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
2011/07/06 8:11:48 B77AD6C0 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/07/06 8:11:48 B77AD6C0 s signal handling initialized (type=sysv)
2011/07/06 8:11:48 B77AD6C0 s 1072 service-id's loaded
2011/07/06 8:11:48 B77AD6C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/07/06 8:11:48 B77AD6C0 s 6 provid's loaded
2011/07/06 8:11:48 B77AD6C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/07/06 8:11:48 B77AD6C0 s monitor: disabled
2011/07/06 8:11:48 B77AD6C0 s camd33: disabled
2011/07/06 8:11:48 B77AD6C0 s camd35: disabled
2011/07/06 8:11:48 B77AD6C0 s cs378x: disabled
2011/07/06 8:11:48 B77AD6C0 s newcamd: initialized (fd=5, port=4401, crypted)
2011/07/06 8:11:48 B77AD6C0 s CAID: 0604
2011/07/06 8:11:48 B77AD6C0 s provid #0: 000000
2011/07/06 8:11:48 B77AD6C0 s cccam: initialized (fd=6, port=45418, crypted)
2011/07/06 8:11:48 B77AD6C0 s radegast: disabled
2011/07/06 8:11:48 B77AD6C0 s http thread started
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB0 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB1 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB2 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB3 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB4 slot 0
2011/07/06 8:11:48 B77AD6C0 s waiting for local card init
2011/07/06 8:11:48 B6777B70 r reader thread started (thread=B6777B70, label=red3, device=/dev/ttyUSB2, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B6777B70 r ERROR opening device /dev/ttyUSB2
2011/07/06 8:11:48 B6777B70 r Cannot open device: /dev/ttyUSB2
2011/07/06 8:11:48 B5F76B70 r reader thread started (thread=B5F76B70, label=red4, device=/dev/ttyUSB3, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B5F76B70 r ERROR opening device /dev/ttyUSB3
2011/07/06 8:11:48 B5F76B70 r Cannot open device: /dev/ttyUSB3
2011/07/06 8:11:48 B5775B70 r reader thread started (thread=B5775B70, label=red5, device=/dev/ttyUSB4, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B5775B70 r ERROR opening device /dev/ttyUSB4
2011/07/06 8:11:48 B5775B70 r Cannot open device: /dev/ttyUSB4
2011/07/06 8:11:48 B6F78B70 r reader thread started (thread=B6F78B70, label=red2, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B6F78B70 r ERROR opening device /dev/ttyUSB1
2011/07/06 8:11:48 B6F78B70 r Cannot open device: /dev/ttyUSB1
2011/07/06 8:11:48 B7779B70 r reader thread started (thread=B7779B70, label=red1, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B7779B70 r ERROR opening device /dev/ttyUSB0
2011/07/06 8:11:48 B7779B70 r Cannot open device: /dev/ttyUSB0
2011/07/06 8:11:48 B77BC280 h HTTP Server listening on port 8123
2011/07/06 8:11:51 B77AD6C0 s init for all local cards done
2011/07/06 8:11:51 B77AD6C0 s anti cascading disabled
2011/07/06 8:11:51 B77B5280 c client connected to 4401 port
2011/07/06 8:11:51 B77B5280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au=red1)
2011/07/06 8:11:51 B77B5280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:11:51 B77B5280 c AU wont be used on this port -> disable AU
2011/07/06 8:11:58 B77B5280 c Connection closed to client
2011/07/06 8:11:58 B77B5280 c test1234 disconnected from 192.168.11.9
2011/07/06 8:11:58 B77B5280 c thread B77B5280 ended!
2011/07/06 8:11:58 B4F74280 c client connected to 4401 port
2011/07/06 8:11:58 B4F74280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au=red1)
2011/07/06 8:11:58 B4F74280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:11:58 B4F74280 c AU wont be used on this port -> disable AU
2011/07/06 8:12:06 B77B5280 c client connected to 4401 port
2011/07/06 8:12:06 B77B5280 c client(B77B5280) duplicate user 'test1234' from 192.168.11.9 set to fake (uniq=1)
2011/07/06 8:12:06 B77B5280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au(auto)=0)
2011/07/06 8:12:06 B77B5280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:12:06 B77B5280 c AU disabled for user test1234
C2011/07/06 8:12:11 B77AD6C0 s exit with signal 2
2011/07/06 8:12:11 B77AD6C0 s cardserver down

comment:11 by pooyair, 13 years ago

@xfiles_2007

  1. are u blind? before u post these useless log lareq78 said he is suspicious to r5205 , is that really hard for u to test one revision , then how u could expect another guy take time for helping u ...
    5000 same issue, doesnt work
    4500 same issue, doesnt work
    
    
  1. don't give invalid info here, reporter of #1959 , said r4900 works.
  1. don't be surprised , devs here does not have all protocol , hardware . sure if ie lareq78 has newcamd protocol , he would reproduce and test it himself . so he is too nice that want to help u about something that he doesn't use .
Last edited 13 years ago by pooyair (previous) (diff)

comment:12 by xfiles_2007, 13 years ago

@pooyair

  1. are you blind ?? i wrote that r5204 doesnt work , which is what he asked me to check.
  2. Well for me the revisions i posted above dont work - r4000 seems to be the only one as per my posts above.
  3. yup i am gladful for all his help and he is nice - i cant believe how rude you are though - i am just reporting my issue and the tests ive done.

comment:13 by Deas, 13 years ago

can we PLEASE switch this discussion to the streamboard forum (e.g.: http://www.streamboard.tv/wbb2/board.php?boardid=235)? trac is for trouble tickets and NOT the right place for a long discussion. so far we have nearly no information that could help to find the reason and we also don´t know your config and what clients you have that cause this problem.

so please open a thread in forum and try to present your config as detailed as possible. thank´s!

comment:14 by lareq78, 13 years ago

Resolution: invalid
Status: reopenedclosed

open a thread in forum for discuss and of course post your config!

Last edited 13 years ago by lareq78 (previous) (diff)
Note: See TracTickets for help on using tickets.