Timeline
10/03/10:
- 23:55 Changeset [3364] by
- cccam: changed UA format cccam: updateded Partner detection
- 21:57 Ticket #986 (Sky It Detecting card 0919 failed with new and old oscam) updated by
-
Priority changed
i can confirm... check --> … - 21:46 Changeset [3363] by
- module.*: Introduce client param get_dcw, send_dcw
- 21:24 Ticket #987 (build #3362) closed by
- invalid: RTFM + put the oscam.tiers file in the config path if needed
- 21:16 Ticket #987 (build #3362) created by
- Dear all on oscam build build #3362 have oscam.tiers failure please …
- 20:39 Changeset [3362] by
- module.*: Introduce client parameter, eliminating cs_idx looping
- 19:44 Changeset [3361] by
- oscam.c Remove unused wait4master
- 19:34 Ticket #986 (Sky It Detecting card 0919 failed with new and old oscam) created by
- Since 2 or 3 days i noticed that after rebooting my dm800hd …
- 19:07 Ticket #967 (Oscan 3339 crash after " no suitable card on server (auto blocked)") updated by
- Autoblock disabled, oscam is OK. Replying to [ticket:967 …
- 18:48 Changeset [3360] by
- ifd_smartreader.c: some code cleanup
- 18:48 Ticket #979 (DVBAPI not compiled) closed by
- fixed: fixed at 3358.…
- 18:44 Changeset [3359] by
- ifd_smartreader.c : check for a fixed freq of 368 and set the smargo …
- 18:23 Changeset [3358] by
- compile with dvbapi support when -DTUXBOX is set
- 17:53 Ticket #979 (DVBAPI not compiled) updated by
- setup your config - run config.sh - Choose Addons - HAVE_DVBAPI
- 17:53 Ticket #985 (Oscam crash after allot of invalid header lengths) created by
- Using Oscam as CCcam replacement. Around 30 readers and users. Since …
- 16:42 Ticket #979 (DVBAPI not compiled) updated by
-
Priority changed
- 16:42 Ticket #979 (DVBAPI not compiled) updated by
- in build 3352 and newer dvbapi not working again (also recognizeable …
- 16:39 Ticket #984 (DVBAPI Process not running) closed by
- duplicate: see ticket #979
- 16:36 Ticket #984 (DVBAPI Process not running) created by
- Since build 3352 the dvbapi process is not running anymore
- 16:20 Changeset [3357] by
- add macro D_USE, if WITH_DUBUG is defined warns if variable is not …
- 15:56 Changeset [3356] by
- oscam.c Integrate send_restart_cardreader and restart_cardreader …
- 15:51 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) updated by
- I mean the system time of your device
- 15:27 Changeset [3355] by
- globals.h remove client->cidx since it is silly to store index of …
- 15:26 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) updated by
- make sure you have set the right alignment echo 2 > …
- 15:23 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) reopened by
- it had the right time, or what do you mean with set the right time?
- 15:18 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) closed by
- invalid
- 15:16 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) updated by
- The "not found" are ok, the card is not valid anymore, but the …
- 15:14 Ticket #983 (CMake Error: Error in cmake code) updated by
- Just compiled and got no error: […]
- 15:11 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) updated by
- […] @All: who the fuck has tagged 3348 as stable? X/ Only modules …
- 15:06 Ticket #983 (CMake Error: Error in cmake code) created by
- Compiling new oscam i have this eror: Checked out revision 3354. -- …
- 15:04 Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) created by
- Hi, i successfully compiled oscam rev. 3353 on armv5tel. But in the …
- 14:55 Changeset [3354] by
- compile error fixes
- 14:53 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) reopened by
- "your are not using original oscam." what do you want to say?!? …
- 14:31 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) closed by
- wontfix: oscam is not able to automaticlly insert anything into your config …
- 13:36 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) updated by
- Hi The code that I fixed has not changed, I have checked, so I am …
- 13:12 Ticket #979 (DVBAPI not compiled) updated by
- Correction: in build 3350 DVBAPI functions ok, but still with the …
- 12:26 Ticket #981 (DVBAPI not working in 3353) closed by
- duplicate
- 12:16 Ticket #981 (DVBAPI not working in 3353) created by
- DVBAPI isn't working in mipsel build 3353, please fix! …
- 12:09 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) updated by
-
Summary changed
- 12:00 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) updated by
-
Priority changed
This is a pid variable problem, can someone fix it please: Pid 2 is … - 11:59 Ticket #980 (Segmentation fault on dm500 since build #3103) created by
- Hi everybody Since this build on my dm500 I have a segmentation fault …
- 11:29 Ticket #979 (DVBAPI not compiled) created by
- From 3348 not automatically compiled DVBAPI....Tested compiled mips …
- 11:18 Ticket #978 (failed to read UM01/UM02/UM03 Smartcards in DB7025+ internal SC-Reader) created by
- since ca. Oscam Version 960, the nagra-reader.c for Unitymedia …
- 11:14 Changeset [3353] by
- fix compile error
- 11:04 Ticket #975 ([3350] config.sh - configuration not saved) updated by
- Sorry for my mistake here, I was to fast with my changes. Thanks …
- 10:54 Ticket #977 (HTTP crashing bug) created by
- in the 3348 version i get a http crashing bug. In the -d255 log i get: …
- 10:52 Ticket #976 (CCcam users banned because of bad account detection) created by
- Sometimes i have like 7 clients banned at the start... It bans all the …
- 10:49 Ticket #975 ([3350] config.sh - configuration not saved) closed by
- fixed: fixed with r3352
- 10:45 Changeset [3352] by
- fix #975
- 10:44 Changeset [3351] by
- Let's not put everything in globals.h
- 10:38 Ticket #975 ([3350] config.sh - configuration not saved) created by
- config.sh is not saving the configuration. Addons data remains …
- 10:30 Changeset [3350] by
- Cleanup of module config.
- 10:23 Changeset [3349] by
- Reader specific code does not have to be globally visible anymore.
- 10:19 Ticket #974 (no orf 0d95 cryptoworks emms more? and hrt 0500:030a00 viaccess 3 also.) updated by
- that´s correct - there is something broken with the cw emm processing. …
- 10:16 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) reopened by
- Hi, thanks rebdog for fixing this error but some version after your …
- 07:28 Ticket #974 (no orf 0d95 cryptoworks emms more? and hrt 0500:030a00 viaccess 3 also.) updated by
- please post oscam.version (Webif menu'FILES')
- 01:53 Ticket #974 (no orf 0d95 cryptoworks emms more? and hrt 0500:030a00 viaccess 3 also.) created by
- this is the log with the newest build: 010/10/03 1:46:50 708 c05 …
10/02/10:
- 22:27 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) updated by
-
Summary changed
= same as ticket 958 by Eskimofan :) Astra 19.2 Canaldigitaal … - 22:15 Changeset [3348] by
- fix for last commit
- 22:04 Changeset [3347] by
- make reader-irdeto threadsafe
- 20:31 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) updated by
-
Component changed
Seems to me it is DVBAPI update from channel to stream is at the root … - 20:17 Changeset [3346] by
- try to fix viaccess emm on some card. I commented the set provider …
- 20:11 Ticket #971 (Missing feature: Close a single user/connection) closed by
- fixed: reimplemented in head
- 20:11 Changeset [3345] by
- WebIf: reaktivate kill clients and restart readers from statusview
- 20:04 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) updated by
-
Summary changed
it seems version 3315 was still ok, since 3316 till 3343 this happens: … - 19:40 Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) created by
- No audio on NED1 / all SD channels of canaldigitaal Reverting back to …
- 19:19 Ticket #972 (SVN 3342 - Multiple CCcam connection from a single host remains persistent) created by
- If a client/host connects multiple times using the same …
- 19:18 Ticket #966 (now shutdown not works for remot control, oscam monitor) updated by
- Do we already have easter again? Post a patch or avoid such comments …
- 19:13 Ticket #971 (Missing feature: Close a single user/connection) created by
- In the previous version, when Oscam was managing a single PID per …
- 19:03 Ticket #970 (/tmp/.pauseoscam does not work, and oscam stop running when reciver ...) updated by
- You are right - somebody has removed the request for STANDBY_FILE. …
- 18:57 Ticket #966 (now shutdown not works for remot control, oscam monitor) reopened by
- svn3344, no longer works, use the source code from svn3089
- 17:35 Ticket #970 (/tmp/.pauseoscam does not work, and oscam stop running when reciver ...) created by
- "Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes …
- 17:00 Ticket #966 (now shutdown not works for remot control, oscam monitor) closed by
- fixed: check head
- 17:00 Changeset [3344] by
- change exit method in monitor modul
- 16:57 Ticket #968 (openpli dm800 mipsel oscam build >3316 canaldigitaal card) closed by
- fixed: Mipsel build 3343: everything functions again :)
- 16:40 Ticket #969 (bug variant CMD 05) created by
- after almost 180 minutes of connecting to a server cccam 2.1.4 oscam …
- 15:58 Ticket #968 (openpli dm800 mipsel oscam build >3316 canaldigitaal card) created by
- oscam build 3303 was the latest build where my canaldigitaal card …
- 15:39 Changeset [3343] by
- fix udp server (first request was always dropped)
- 14:12 Ticket #966 (now shutdown not works for remot control, oscam monitor) reopened by
- now works, but it does not send the message, server down as before
- 11:46 Ticket #954 (OSCam Login Passwort Bug - Access with every passwort of same length ...) updated by
- Bug only in CCcam Protocol…
- 10:23 Ticket #966 (now shutdown not works for remot control, oscam monitor) closed by
- fixed: Plese check head Revision
- 10:23 Changeset [3342] by
- fix for shutdown via monitorport Ticket #966
- 10:03 Changeset [3341] by
- cccam: changed locking behaviour
- 07:29 Ticket #967 (Oscan 3339 crash after " no suitable card on server (auto blocked)") created by
- After this Oscam crash, only 4 reader cccam and no other. Now i try to …
- 05:55 Changeset [3340] by
- fix an error message in viaccess ecm
10/01/10:
- 23:02 Changeset [3339] by
- cccam: reverted Gorlan.NG change for rekursive locks. Recursive looks …
- 22:47 CardsList edited by
- added YOUSEE / TDC - Cable ( DK ) (diff)
- 22:42 Changeset [3338] by
- fix mistakenly changed oscam-config.h defaults
- 22:35 Changeset [3337] by
- fixes for missing bracket warnings around cs_debug when compiled …
- 22:19 Changeset [3336] by
- cccam: changed card update order back to add new - remove old because …
- 22:18 Ticket #837 (caid 096c now missing from videoguard2 atr list) closed by
- fixed: Closing added
- 22:15 Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) closed by
- fixed: closing as fixed
- 22:08 CardsList edited by
- (diff)
- 21:59 Ticket #965 (ECM reset form Serial or USB Smartreader) updated by
-
Priority, Type changed
- 21:58 Changeset [3335] by
- remove udp pipes
- 21:47 Ticket #966 (now shutdown not works for remot control, oscam monitor) created by
- now shutdown not works for remot control, oscam monitor.
- 21:04 Ticket #965 (ECM reset form Serial or USB Smartreader) created by
- oscam running, the card counter, Is it possible to reset after a …
- 19:55 Changeset [3334] by
- cccam: login-auth now showing crypted correct
- 19:48 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) closed by
- fixed: in #3333 yipieh ;-)
- 19:48 Changeset [3333] by
- fix for Ticket #963
- 19:39 Ticket #961 (Makefile with -DWEBIF) updated by
- ??? <Documentation>Use Spacebar to select/unselect, Cursor Keys to …
- 18:24 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) updated by
- i mean if you already has changed and tested on your end - make a diff …
- 18:02 Ticket #964 (client number not equal to client number on log) created by
- I've been looking at log and I have (for example) cliente nº 30 on log …
- 17:58 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) updated by
- sure but if we work with config.sh it should be correct when disable …
- 17:45 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) updated by
- best way to get smthg patched is providing a diff vs. head ;-)
- 17:43 Ticket #961 (Makefile with -DWEBIF) updated by
- Not having the possibility to choose between switches or config GUI, …
- 17:37 Ticket #962 (config.sh: if disable debug = error on module-dvbapi.c) closed by
- duplicate
- 17:30 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) updated by
-
Owner, Status changed
- 17:29 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) updated by
- sorry dammned slow ff. doubled!
- 17:29 Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) created by
- for testing i disbaled cs_debug in config.sh and try build but than …
- 17:29 Ticket #962 (config.sh: if disable debug = error on module-dvbapi.c) created by
- for testing i disbaled cs_debug in config.sh and try build but than …
- 16:34 Ticket #961 (Makefile with -DWEBIF) closed by
- wontfix: Think merek has removed it because you can very easy use the …
- 16:13 Ticket #961 (Makefile with -DWEBIF) created by
- Please set -DWEBIF again into Makefile as in the last svn's before, so …
- 16:01 Ticket #960 (Since #3332 no connection to WebIf) closed by
- fixed: Found it out! Makefile's in the last checkouts are without -DWEBIF. …
- 13:40 Ticket #960 (Since #3332 no connection to WebIf) updated by
- no - no changes. Native make on i686 works without problems in FF I …
- 13:33 Ticket #960 (Since #3332 no connection to WebIf) reopened by
- Any changes in oscam.conf in last time?? here my config: [webif] …
- 13:21 Ticket #960 (Since #3332 no connection to WebIf) closed by
- invalid: the webif works perfectly control your conf
- 13:11 Ticket #960 (Since #3332 no connection to WebIf) created by
- Since installation from svn 3332 is WebIf from browser (firefox) not found!
- 12:00 Changeset [3332] by
- Documentation update for 'updateinterval', again.
- 11:29 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
- THX @ landlord The WebIf integration of the new parameters follows soon
- 11:21 Ticket #952 (Docu of parameter 'updateinterval' is wrong) closed by
- fixed: Done. Thanks for input.
- 11:20 Changeset [3331] by
- Documentation update for 'updateinterval'.
- 11:16 Changeset [3330] by
- Limiting of SIDs on reader: 'ratelimitecm' and 'ratelimitseconds'.
- 10:53 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
- Thanks! @crew: If somebody else is able to commit this patch - do so. …
- 10:53 CardsList edited by
- (diff)
- 10:44 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
- Here is the diff on the latest svn version.
- 10:38 Changeset [3329] by
- Documentation for new parameter 'failbantime'.
- 10:20 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
- I will do it this weekend and send again the diff. thanx.
- 09:33 Changeset [3328] by
- auth client: ip block/dyndns etc fixed cccam: reversed card exchange, …
- 08:54 Ticket #957 (Client cccam after 20 seconds receive 0 cards) updated by
- There are some problems in card reporting procedure. Because after …
- 05:47 Changeset [3327] by
- readervideoguard: preparations for modular compiling
- 03:44 Changeset [3326] by
- fix debug infos
- 03:20 Changeset [3325] by
- dvbapi: add some debug infos
- 01:43 Changeset [3324] by
- updated the comments in the cw emm processing
- 01:28 Changeset [3323] by
- more cw emm. fix the len of the final reassembled emm
- 01:20 Changeset [3322] by
- fix a memcpy for the reassembled emm in the cw emm processing
- 00:45 Changeset [3321] by
- readervideoguard: move more common code to reader-videoguard-common.c
09/30/10:
- 23:59 Changeset [3320] by
- reset emm_global_len after reassenbling cw emm. Something is broken in …
- 23:55 Changeset [3319] by
- WebIf: ad failbantime parameter to config
- 23:50 Changeset [3318] by
- WebIf: Add failban overview and managing
- 23:34 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by
- fixed: […] No, you try to kick the Developers in their asses by setting …
- 23:21 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) reopened by
- sorry to be posting here all day but I think this is a serious issue …
- 21:18 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
-
Cc changed
_network unfortunately my fixed response was false. after i wrote … - 20:50 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by
- fixed: please use the forum to report problems. there at least 3 different …
- 20:06 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
- could you please diff again vs. head? global.h and reader.c are …
- 19:59 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
-
Priority changed
- 19:57 Ticket #959 (rev 3317 oscam killed on fritzbox) closed by
- worksforme: I have checked camd3 protocol there all is working. Check your config …
- 19:43 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- is strange.. or not.. but it quits ALWAYS on client 338 c338
- 19:17 Ticket #959 (rev 3317 oscam killed on fritzbox) updated by
- anonymous or wrong user pw shutdown server oscam. if correct it works …
- 19:15 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
-
Priority changed
r3317 log d255 still quits... damnnn […] as before it … - 19:05 Ticket #959 (rev 3317 oscam killed on fritzbox) created by
- using oscam 3317 on fritzbox-server camd35 proto to client dm800 (also …
- 18:33 Changeset [3317] by
- fix bug in emm blocker
- 17:46 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- I have 50 clients +/- see last log that quitted c338???? it cycles …
- 17:09 Ticket #795 (Oscam CCCam server svn3047 send Wrong Node Data) closed by
- fixed: schlocke I was test oscam svn 3316 Now send 4 byte for SA all …
- 17:01 Ticket #958 (the problem after changeset 3316) created by
- when I watch the program of 115.5E, the simulcrypt channel only show …
- 15:59 Ticket #954 (OSCam Login Passwort Bug - Access with every passwort of same length ...) updated by
- Tested only for CCcam…
- 15:55 Ticket #954 (OSCam Login Passwort Bug - Access with every passwort of same length ...) updated by
- Same with version 1.0 svn 3190!
- 15:54 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- […] now it quits with this message
- 15:50 Ticket #957 (Client cccam after 20 seconds receive 0 cards) created by
- oscam 3316 at connection all client recive the cards, after 20 seconds …
- 15:22 Ticket #858 (dvbapi ,handle multiple ecm) closed by
- fixed: fixed at r3316.
- 14:17 Changeset [3316] by
- dvbapi: add support for ecms based on stream not channel that seen on …
- 13:56 Changeset [3315] by
- fix unsigned short millitm overflow
- 13:42 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- I've tested with saveinithistory=0 and saveinithistory=1
- 13:40 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- another quit.... same padron when thread is ended and client …
- 13:40 Changeset [3314] by
- cccam: clear cards when client closed. fix recursive lock problem …
- 12:56 Changeset [3313] by
- minor fixes for modular compiling
- 12:50 Changeset [3312] by
- fix a compile warning
- 11:54 Changeset [3311] by
- some minor fixes
- 11:25 Ticket #750 (0500:023700 emm updates don't work) updated by
- The problem is in reader-viaccess.c string number 541 …
- 11:04 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- lateste quit here is the log […]
- 10:56 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) updated by
-
Owner, Status changed
- 10:41 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- I have tested with saveinithistory=0 and saveinithistory=1 result is …
- 10:38 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) reopened by
- after 24 hours without crashes, just a moment ago processes of 2 …
- 10:22 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- it just keeps quitting analised log and there is nothing special about …
- 10:04 Ticket #956 (oscam card Nagra3 + smartgo under ubuntu 10.4 x64 ERROR, function call ...) created by
- For a time is fine but after it appears .. 2010/09/30 8:25:48 31715 …
- 09:30 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- please edit last post to hid dns peer... thanks
- 09:28 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- no its 32bits leave it running and in the morning oscam as quit during …
- 09:14 Changeset [3310] by
- cccam: removed duplicate cards from different sources by remote_node_id
- 08:26 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by
- worksforme: tested 24hrs r3293 is not crashing definetely.. superb fixing, thanks …
- 08:19 Changeset [3309] by
- fix typo
- 08:17 Changeset [3308] by
- implement a failban functionality new parameter …
- 07:57 Changeset [3307] by
- cccam: card exchange exhances, transfering remote node ids
- 05:06 Ticket #759 (DVBAPI should not enabled for mipsel) closed by
- wontfix: you can comment these lines in oscam-config.h
- 04:54 Ticket #576 (priority CAID and preferlocalcards not worked correctly) closed by
- fixed: it's might be fixed,since from 2522.
- 01:50 Ticket #716 (Azbox HD internal cardreader nor cccam client working?) updated by
-
Priority, Component, Severity changed
guys this still doesn't work :) can u guys take a look at this please? … - 01:45 Ticket #955 (3304 error compiling on debian5) closed by
- fixed
- 01:36 Changeset [3306] by
- fix missing remote_nodes in struct cc_card
- 01:21 Changeset [3305] by
- added more debug for cw emm in dvbapi
- 00:48 Ticket #955 (3304 error compiling on debian5) created by
- […]
- 00:44 Changeset [3304] by
- cccam: updated reporting cards
09/29/10:
- 23:46 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- after a few hours it just quits without any log saveinithistory=0
- 20:14 Ticket #952 (Docu of parameter 'updateinterval' is wrong) updated by
-
Summary changed
- 20:00 Ticket #954 (OSCam Login Passwort Bug - Access with every passwort of same length ...) created by
- Sorry if this issue is already fixxed - don't have the possibility to …
- 18:29 Ticket #953 (Viaccess card after EMM key not found) created by
- After start oscam which paid shows the channel, when I switch to the …
- 18:26 Ticket #952 (Docu of parameter 'updateinterval' is wrong) created by
- this you can found in oscam.server: "updateinval = seconds interval …
- 17:26 Changeset [3303] by
- change my cs_dump to cs_log to help debugging cryptoworks emm as the …
- 16:41 Ticket #951 (Reporting card on 3302 -> every 20 seconds without cards changing) created by
- I get every 20 seconds: 2010/09/29 15:36:07 23948 c10 cccam(s) abcd: …
- 16:41 Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) created by
- I have made some changes that allow for dynamic limiting of sids on a …
- 15:36 Ticket #948 ([3288] Client connection drops if no access to monitor) closed by
- invalid: The oscam-cccam-server disconnects a client if it is inactive longer …
- 15:01 Ticket #795 (Oscam CCCam server svn3047 send Wrong Node Data) updated by
- Oscam svn 3302 Sent only one byte for SA. I think all work right …
- 14:38 Ticket #707 (Add support for StreamGuard CAS) updated by
- The season's log for StreamGuard post …
- 14:11 Changeset [3302] by
- cccam: SA format changed, card-update interval 0 valid for updates …
- 13:51 Ticket #795 (Oscam CCCam server svn3047 send Wrong Node Data) updated by
- Oscam svn 3295 All data sent correct, SA only one byte. […] […]
- 13:44 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- could it be when we "browse" webif it quits oscam if we enter …
- 13:44 Ticket #940 (Segmentation fault error - Problem with oscam.tiers) closed by
- invalid
- 13:35 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- r3293 - 4 instances after 4 hours, no crashes or quits. seems fine. …
- 13:24 Ticket #750 (0500:023700 emm updates don't work) updated by
- you should stop the sellery for this lazy developers
- 13:16 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- r3301 same problem oscam quits after some time.. no log :-(
- 12:54 Ticket #750 (0500:023700 emm updates don't work) updated by
- End of month, it still doesn't work. =(
- 11:12 Ticket #943 (keepalive after maxidle is reached -> Mipsel problem) closed by
- fixed: Corrected on 3300
- 10:54 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- I have 2 instances of oscam running One has local card and 50 peers …
- 10:49 Changeset [3301] by
- cccam: format of SA in card-sharelist changed
- 10:09 Ticket #949 (Problems with processing Conax ECMs) created by
- I found a bug in while processing the ECMs. First of all, the log, …
- 10:06 Changeset [3300] by
- cccam: changed behaviour of card update interval, now updates only if …
- 09:30 Changeset [3299] by
- cosmetic fixes
- 09:21 Changeset [3298] by
- Fix default WEBIF setting in Makefile
- 09:18 Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) updated by
- now testing with r3293
- 09:17 Changeset [3297] by
- modular: Adding Tongfang to config script
- 08:45 Changeset [3296] by
- modular - adding Anticascader to config script
- 08:04 Ticket #675 (oscam merge two cards for au users) reopened by
- Still have the same problem with trunck 3291. So reopened
- 08:00 Ticket #936 (Build 3265) updated by
-
Owner, Status changed
Still have the segmentation error on latest version for enigma 1 - 01:39 Ticket #943 (keepalive after maxidle is reached -> Mipsel problem) updated by
- Problem continues on 3295. I keep getting "keepalive after maxidle is …
- 01:08 Ticket #942 (Crash after socket creation on r3280) updated by
- r3295 on Debian Squeeze builded with: […] Final part of the log: …
- 00:02 Ticket #942 (Crash after socket creation on r3280) updated by
- I update and try
Note:
See TracTimeline
for information about the timeline view.