Timeline
08/24/12:
- 21:45 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- Hi guys, I am now working on some improvements of the patch (I'll use …
- 18:22 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) updated by
- Unfortunately this is not the case
- 18:00 Ticket #2703 (Unable to get NDS ROM version) updated by
- this new patch should show rom version also for v13 without error. …
- 17:56 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) updated by
- Also, lb_reopen_mode=1 should ALWAYS reopen a channel, if no …
- 17:55 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) updated by
- You can avoid blocking by setting services on your local cards. Also …
- 17:02 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) reopened by
- Unfortunately the issue has not been fixed. I waited to answer to …
- 16:54 Changeset [7282] by
- Introduction to automatic selection of static or dynamic libusb-1.0 In …
- 14:50 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- there is no necessity open new ticket with r7281 cmake compiling work thx
- 09:33 Ticket #2703 (Unable to get NDS ROM version) closed by
- fixed
- 09:32 Ticket #2703 (Unable to get NDS ROM version) updated by
- fixes SVN 7281 2012/08/24 15:13:46 90B31A8 r d2h [smartreader] Answer …
- 07:59 Ticket #2703 (Unable to get NDS ROM version) updated by
- @lattjo: just tested SVN 7281. Looks good so far, the V13 card works …
- 02:03 Ticket #2704 (peers disconnecting) updated by
-
Sensitive changed
- 01:32 Ticket #2703 (Unable to get NDS ROM version) updated by
- I saw the log, but i think that I missing something first of all i …
08/23/12:
- 23:33 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- @luckysquid Did You open new ticket? This one is closed if so pas it …
- 20:24 Changeset [7281] by
- fix error previous patch
- 20:20 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- Please open new tickets, do not abuse this one.
- 20:03 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- @stefansat thx for cmake fix but in r7279 I have other errors …
- 19:51 Ticket #2703 (Unable to get NDS ROM version) updated by
- I tried to do a fix in r7280, close the ticket if it works.
- 19:50 Changeset [7280] by
- Videoguard: Not all cards support get ROM version, hopefully fixes #2703
- 19:20 Changeset [7279] by
- Fix Cmake compile error on mac.
- 18:16 Ticket #2703 (Unable to get NDS ROM version) updated by
- I seem to be having the same problem as lintendo, and it looks as if …
- 17:46 Ticket #2703 (Unable to get NDS ROM version) updated by
- Please make a debug log, start oscam with -d255. It's clear what …
- 15:54 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) updated by
- I just updated the patch according to the current discussion @ SB.
- 15:52 Ticket #2704 (peers disconnecting) updated by
- I removed the function "card %08X timed out! refresh forced" and …
- 15:37 Ticket #2704 (peers disconnecting) created by
- Hello again Unfortunately, the latest compilation of oscam #7278 still …
- 13:42 Ticket #2703 (Unable to get NDS ROM version) updated by
- your problem is 2012/08/23 19:03:00 9DDFD70 r d2h [smartreader] …
- 13:08 Ticket #2703 (Unable to get NDS ROM version) created by
- = Revision <7278> = Issue Description <Please fill in> = When the …
- 12:03 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) closed by
- fixed: Patch commited in r7278. Thanks.
- 12:03 Changeset [7278] by
- vg2: Extract ROM version. Patch by lintendo @ streamboard. Fixes …
- 11:26 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- ok re-tested! All right :)
- 00:40 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- I'am sorry, i realy was thinking i was on the official website, well …
08/22/12:
- 23:08 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) closed by
- invalid: oscam.to is no official website. it is just a forum supporting oscam. …
- 22:56 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) reopened by
- 22:56 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- I get it from the official website, here: …
- 19:44 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) updated by
- I'll test it, but this happens with and without services on the local …
- 19:41 Ticket #2682 (Loadbalance (If a channel is not found it will not be cleared anymore)) closed by
- fixed: Yes, I think this happens if you have no services on your local cards …
- 19:39 Changeset [7277] by
- lb: fixed reopen_seconds with local readers (see #2682)
- 17:37 Ticket #2693 (-b parameter not working anymore) closed by
- worksforme: As the creator of this ticket said, CLOSED
- 17:33 Ticket #2702 (German Sky V13 card not working at all after update from 7257 > 7275) closed by
- invalid: can you read??? "unable to get NDS ROM version" - THIS IS NOT AN …
- 17:32 Ticket #2698 (Oscam crashes after enable DVB-api) closed by
- fixed: fix at #7276 by gf
- 16:15 Ticket #2702 (German Sky V13 card not working at all after update from 7257 > 7275) updated by
- card works here good! As written so often: it is a local problem, …
- 15:31 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- Yes.
- 14:30 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- sorry, I made a mistake the reader was in idle therefore: hereafter, I …
- 14:22 Ticket #2702 (German Sky V13 card not working at all after update from 7257 > 7275) created by
- = Revision <7275> = Issue Description <22/08/2012 14:14:16 9B0F288 r …
- 14:19 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- The reader is not working how? It would be very strange if compiling …
- 14:17 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- Ah, I wasn't sure what is there besides numbers, change the check to: …
- 13:57 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- Perhaps I was not clear, (don't speak eniglish) with r7276 binary …
- 13:52 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- 359 } else { 360 cta_res[i] = '*'; is wrong bcs in …
- 12:36 Ticket #2701 (German Sky V13 card not working at all after update from 7258) updated by
- Again with this crap? I think ticket #2700 made it clear what is going …
- 12:34 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- How about the attached patch. I have cleaned up your patch a little …
- 12:04 Ticket #2701 (German Sky V13 card not working at all after update from 7258) closed by
- invalid
- 11:41 Ticket #2701 (German Sky V13 card not working at all after update from 7258) created by
- = Revision <Please fill in> = Issue Description <Please fill in> = …
- 11:19 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- Ok, I think I'll apply this (after fixing the funky whitespace).
- 11:15 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- There is no such message "unable to get NDS ROM version" anywhere in …
- 11:12 Ticket #2689 (patch to show rom version in reader-entitlement section for vg2 card) updated by
- back from holidays :( new patch is ok tested with: ITTV-30LJ 93b …
- 11:11 Changeset [7276] by
- module-stat: Fix possible segfault related to lb_savepath. …
- 11:10 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- as i said - invalid! and why don´t you at least tell us that you use …
- 11:02 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) closed by
- invalid
- 11:02 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- you have a oscam compiled with my first version of patch for show rom …
- 10:49 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) reopened by
- 10:34 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- Tryed again, and here is my log: 22/08/2012 10:32:43 99B0A70 r …
- 10:21 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) updated by
- He probably uses stapi, unfortunately since it is a binary there were …
- 09:06 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- Hi I've just added the updated version which incorporates all your …
- 08:07 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) closed by
- invalid: sorry, if the v13 would not work at all a lot of people would complain …
- 03:00 Ticket #2696 (Tongfang 4A02 NTIC2 Can't watch) updated by
- My IDEA byte log from season2 logger !! This Log has change away …
- 02:27 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- And also open a new ticket, this one is from the stone age and already …
- 02:26 Ticket #1711 (Oscam compile error on mac osx intel) updated by
-
Build with
make USE_LIBUSB=1
that should work. - 01:56 Ticket #1711 (Oscam compile error on mac osx intel) updated by
- hi, new errors r7275 [ 98%] Built target oscam Linking C executable …
- 00:21 Ticket #2700 (German Sky V13 card not working at all (after update from 7258 till now)) created by
- = Revision 7258 = Issue Description Card not seen, ask for NDS rom …
- 00:07 Ticket #2699 (after update from 7245 to 7274 german sky v13 card crashes) closed by
- worksforme: Please open a thread in the forum, coz oscam is working like a charm …
08/21/12:
- 23:29 Ticket #2699 (after update from 7245 to 7274 german sky v13 card crashes) reopened by
- 22:20 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
- Might be :) This is already fixed in svn, the other hunks are …
- 22:16 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
- is "...strlen(cfg.lb_savepath))" really correct? shouldn´t it be …
- 21:44 Ticket #2695 (Oscam for processors mipsel crashes when saving configurations) updated by
- This is not the full patch, see ticket #2698.
- 21:19 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) updated by
- I can see some workarounds for EMM handling on nagra in module-cccam.c …
- 20:16 Ticket #2695 (Oscam for processors mipsel crashes when saving configurations) closed by
- fixed: r7275
- 20:12 Changeset [7275] by
- oscam-config.c - fix for #2695, tnx to polskafan @ SB!
- 19:51 Ticket #2699 (after update from 7245 to 7274 german sky v13 card crashes) updated by
- There must be a problem with oscam. I restarted the system many times …
- 19:17 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) updated by
- See get_UA_ofs() function in module-cccam.c. There maybe lying the …
- 19:14 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
-
Cc changed
Please try the attached patch. It fixes couple of possible segfaults … - 19:08 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
- Instead of recommending a workaround which helps in no way to resolve …
- 18:06 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
- Workaround ... Define in WebIf the Parameter "Statistics save path" in …
- 17:44 Ticket #2698 (Oscam crashes after enable DVB-api) updated by
-
Summary changed
- 17:39 Ticket #2699 (after update from 7245 to 7274 german sky v13 card crashes) closed by
- worksforme: This is a problem with usb. Restart the system and start oscam. Please …
- 16:54 Ticket #2699 (after update from 7245 to 7274 german sky v13 card crashes) created by
- = Revision 7274 = Issue Description German Sky V13 crashes after a …
- 16:03 Ticket #2582 (Caid 0650, must be a simple problem) closed by
- fixed: The problem was that this CAID needs camkey and camkey data (boxkey …
- 15:59 Ticket #2698 (Oscam crashes after enable DVB-api) created by
- = Revision #7274, x86 = Issue Description Oscam crashed when …
- 15:58 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) updated by
- Actually investigating the problem further, I discovered it is a CCcam …
- 15:48 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- By the way I'm using this …
- 15:17 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) updated by
- Looks sane, I think we should apply this one. It needs documentation …
- 14:52 Ticket #2697 (CCcam Client EMMs on HD+ HD02 (1843) Card) created by
- = Revision 7274 (all) = Issue Description EMMs from CCcam (all …
- 13:30 Ticket #2690 ([PATCH] Set Pincode on VG2) updated by
- The webif part of the patch makes no sense (it doesn't matter if it is …
- 13:27 Ticket #2690 ([PATCH] Set Pincode on VG2) updated by
- it's working with 0963 it reads the right pin from the card. does this …
- 12:24 CardsList edited by
- deleted platforma doesnt exist any longer - changed digiturk from … (diff)
- 10:57 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- The changes that you have made since v1 of the patch look OK, but …
- 09:11 Ticket #2693 (-b parameter not working anymore) updated by
- grmpf... if you would finally specify what "a while" or "a very long …
- 07:52 Ticket #2693 (-b parameter not working anymore) updated by
- it takes a very long while... longer than the init for the cards... …
- 02:36 Ticket #2696 (Tongfang 4A02 NTIC2 Can't watch) created by
- = Revision 7245 = Issue Description Log Tongfang For Develop …
- 00:10 Ticket #2695 (Oscam for processors mipsel crashes when saving configurations) updated by
- Workaround ... Define in WebIf the Parameter "Statistics save path" in …
08/20/12:
- 22:55 Ticket #2695 (Oscam for processors mipsel crashes when saving configurations) created by
- = Revision <7274 compiled by lepouSat and gianni1827 tested vu+ uno …
- 22:54 Ticket #2693 (-b parameter not working anymore) updated by
-
Priority changed
and where is the problem? just because "it takes a while"? - 20:29 Ticket #2693 (-b parameter not working anymore) updated by
- sorry, priority is indeed minor... problem occured because i set …
- 16:14 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- Please create a thread for discussion on the Streamboard. Thanks in …
- 14:32 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- Ok - i assumed that it was your point. You was indeed right - now the …
- 14:22 Ticket #2693 (-b parameter not working anymore) updated by
- Working fine here, I start f.i. with the parameters: -c <configdir> -r …
- 13:18 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- I think i can define a macro named eg IP_STRUCT which will define a ip …
- 13:05 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- Hi! Unfortunately we cannot just change in_addr_t to in6_addr. These …
- 12:49 Ticket #2676 (massive memory leak with cacheex) updated by
- Hello - Kind request to Corsair to look again at this ticket. All …
- 12:20 Ticket #2693 (-b parameter not working anymore) updated by
- Works for me.
- 12:17 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) updated by
- The diff is quite ugly with all these ifdefs. Please rework it to …
- 10:12 Ticket #2694 ([PATCH] Add full IPv6 support for client/server) created by
- Hello I've prepared a patch to enable IPv6 support in oscam. Currently …
- 10:01 Ticket #2693 (-b parameter not working anymore) created by
- = Revision 7274 = Issue Description since 7274 when you start OSCam …
- 00:00 Changeset [7274] by
- fixed a segfault on exit oscam, also fixes missing log entries on exit
Note:
See TracTimeline
for information about the timeline view.