Timeline
01/25/13:
- 23:03 Ticket #3091 (OSCam restarting without any error message) updated by
- I`ve had this problem for months now, so using a week old version …
- 22:55 Changeset [8192] by
- Fix possible crash in cccam module when oversized packet is received. …
- 22:51 Ticket #3091 (OSCam restarting without any error message) updated by
- It looks like your oscam is crashing. Such bad behaviour is usually …
- 22:42 Ticket #3091 (OSCam restarting without any error message) updated by
- We are on 8191. You should use the newest build.
- 21:34 Ticket #3091 (OSCam restarting without any error message) created by
- = Revision 8118, but seen it for months now = Issue Description …
- 21:21 Changeset [8191] by
- Small fix in signal handling. With this when ctrl+c is hit in the …
- 21:03 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- root emmtype=shared (8C), len=164, idx=4, cnt=1: written (227 ms) …
- 20:59 Ticket #3090 (Services are not parsed for readers with case sensitive scenarios) closed by
- fixed: 8190 is working fine again, thanks @gf
- 20:14 Ticket #3080 (AU is not going to ACTIVE modes) closed by
- worksforme
- 20:14 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- Again, discuss at forum. TS (TGFS) has written regarding cccam and 6A …
- 18:36 Ticket #3090 (Services are not parsed for readers with case sensitive scenarios) updated by
- Please try r8190.
- 18:35 Changeset [8190] by
- config/reader: Some of values must lowercased otherwise there are …
- 18:25 Ticket #3080 (AU is not going to ACTIVE modes) reopened by
- http://www.streamboard.tv/oscam/ticket/3080#comment:4 Nobody tell me …
- 18:22 Ticket #3090 (Services are not parsed for readers with case sensitive scenarios) created by
- = Revision 8180 upwards = Issue Description Because reader settings …
- 18:02 Changeset [8189] by
- Create default pid file on startup. After this commit here is how …
- 17:16 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- ON means that the client has AU rights and got the necessary …
- 14:26 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- will do this, but i am pretty sure that it is nothing config related! …
- 14:13 Changeset [8188] by
- Add support for long command line parameters. Short parameters (-c) …
- 14:13 Changeset [8187] by
- devtools: Add script that checks command line parameters. The script …
- 14:13 Changeset [8186] by
- Fix the type of pand_send_ecm variable in struct s_reader. It is …
- 14:11 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- PLEASE discuss in forum this is ticket system and not config help
- 13:27 Ticket #3080 (AU is not going to ACTIVE modes) closed by
- worksforme: i use #8183 and "AU is not going to ACTIVE modes" works for me , so it …
- 12:05 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- Try and report: lb_mode=1, put caid and ident in your readers. This …
- 11:52 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- This might be correct for TGFS but not for my case. (see the debugs) …
- 11:52 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- au=card1 and reader his name is card1, so AU must work then.
- 11:21 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- I took a look at your config files. The user has au=card1, but your …
- 11:09 Ticket #3080 (AU is not going to ACTIVE modes) reopened by
- I did some tests and finally switched back from cccam to camd35. With …
- 10:50 Ticket #3089 (Where is the pidfile-tab in webif ?) closed by
- invalid: You can't add it trought webif - add it manually to oscam.conf: …
- 08:53 Ticket #3059 (Locking caid 0100:00006a) updated by
- I understand... the mainproblem is this: I do have it only with …
- 07:50 Ticket #3043 (Case sensitive ecm.info) closed by
- fixed: Thanks gfto. Fixed with r8183.
- 07:32 Changeset [8185] by
- Added new commandline option '-B' to documentation.
- 07:25 Changeset [8184] by
- Added new commandline option '-l' to documentation.
- 03:07 Ticket #3080 (AU is not going to ACTIVE modes) updated by
- Hello all, 1) i have similiar problem with this configuration: …
- 00:21 Ticket #3089 (Where is the pidfile-tab in webif ?) created by
- = 8182 save is ok, the pidfile was saved, but where is the tab in webif?
- 00:18 Ticket #3043 (Case sensitive ecm.info) updated by
- It worked before because the reader label's case was always lowered. …
- 00:18 Changeset [8183] by
- Reader's label can now be anything, stop trying to lowercase it.
01/24/13:
- 23:38 Ticket #3043 (Case sensitive ecm.info) reopened by
- I regret. in the case I label my reader "abc_ABC" and my dvbapi user …
- 23:38 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- > Sorry gf ... i don't speak english. The ticket system is english …
- 23:11 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Sorry gf ... i don't speak english. @beneee ich glaube es Dir doch …
- 23:08 Ticket #2934 (oscam crashes somtimes) updated by
- Maybe it's simply system problem ... have you tried to reinstall linux …
- 23:05 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Guys stick to English please.
- 23:05 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Ist schon so, nen Video dreh ich dir jetzt nich. Vielleicht drücke ich …
- 23:02 Ticket #1838 (EMM NOK for 0500:023800) updated by
- Devs is this patch usefull? If yes pls intergrate it into trunk and …
- 23:01 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- HiHi, schau mal nach Changeset #8182 ... Aber bei Dir hat es ja …
- 22:55 Changeset [8182] by
- webif: Do not lose pidfile setting when saving global config.
- 22:51 Ticket #2392 (Oscam SVN and mask function for caids not working on newcand readers) closed by
- invalid: Who even uses 1801 (when proper one is 1803 for N3 P2C card)? Migrate …
- 22:48 Ticket #2814 (Cacheex 3 and csp wait time (only multiplies of 50)) updated by
- Does this still a problem in never builds? No aswer = closed
- 22:46 Ticket #2787 (CACHE-EX Cache3 hits also pulls from proxy/cardreader) updated by
- There was a lot changes to cacheex recently - is it better now with …
- 22:32 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Was an "i tested both" haste ned verstanden. Wenn Du Englisch nicht …
- 22:29 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Nein, dass schreibe ich in deutsch ... Warum schreibst Du so einen …
- 22:24 Ticket #3085 (powerpc-tuxbox-old, oscam not start) closed by
- fixed: Fixed properly in r8181.
- 22:22 Changeset [8181] by
- Proper fix for ticket #3085 (oscam crashing). Its a little bit of …
- 22:17 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- You set pidfile with vi or nano in oscam.conf, go to webif, …
- 22:10 HeaderWhiteList edited by
- (diff)
- 22:09 Ticket #3087 (Parameter "pidfile" is not generally implemented) closed by
- invalid: It's senselessly. In future i don't create tickets …
- 22:08 Ticket #3088 (Oscam start parameter "-B" must have a default path) closed by
- invalid: It's senselessly. In future i don't create tickets …
- 22:06 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- Well, you have two options: 1) find a document / informations about …
- 22:06 DeviceList edited by
- (diff)
- 22:02 DeviceList edited by
- (diff)
- 22:00 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- Wouldn't it be better for such a param to be just configurable via …
- 22:00 Ticket #3088 (Oscam start parameter "-B" must have a default path) updated by
- If you don't know, then you don't need to use this option. The default …
- 21:59 Ticket #3087 (Parameter "pidfile" is not generally implemented) updated by
- I didn't add this in the webif, because I considered it very low level …
- 21:35 Ticket #3088 (Oscam start parameter "-B" must have a default path) created by
- = 8180 nobody knows, where this pid-file is saved, because nobody …
- 21:29 Ticket #3086 (OSCam restarts 24 times per second) updated by
- fixed with version 8180
- 21:17 Ticket #3087 (Parameter "pidfile" is not generally implemented) created by
- = 8180 = save over webif delete this parameter, because this …
- 20:10 Ticket #3086 (OSCam restarts 24 times per second) updated by
- Here the same with 8179. Happens here only with enigma2 (mipsel) and …
- 19:57 DeviceList edited by
- (diff)
- 19:45 Ticket #3085 (powerpc-tuxbox-old, oscam not start) updated by
- in 8180 to work
- 19:28 Ticket #3086 (OSCam restarts 24 times per second) closed by
- fixed
- 19:26 Ticket #3086 (OSCam restarts 24 times per second) updated by
- Seems to be the same issue as ticket #3085. SVN 8180 works. There's …
- 19:15 Ticket #3085 (powerpc-tuxbox-old, oscam not start) updated by
- Fixed (hacky) in r8180. I'll create a proper fix in couple of hours …
- 19:14 Changeset [8180] by
- Disable parsing of mg-encrypted temporary to fix powerpc crash.
- 19:00 Ticket #3085 (powerpc-tuxbox-old, oscam not start) updated by
- I have reproduced the crash, I'm debugging it right now. I have no gdb …
- 18:57 Ticket #3086 (OSCam restarts 24 times per second) created by
- = Revision 8175 to 8179 = Issue Description OSCam restarts before …
- 18:50 Ticket #2974 (ifd_phoenix.c [build 7982 and up]- ERROR: Could not read ...) updated by
- Working fine with reverted file: …
- 18:46 Ticket #2779 (EMM-S/UQ not passed through to second card in LB) updated by
- Replying to pavulon: > Hi geohei, > are you working on the …
- 18:44 Ticket #2974 (ifd_phoenix.c [build 7982 and up]- ERROR: Could not read ...) updated by
- Replying to gf: > Any updates here? What does r7982 fix? …
- 18:38 Ticket #3085 (powerpc-tuxbox-old, oscam not start) created by
- = Revision <8175-8179> = Issue Description after compiling for …
- 18:09 Ticket #3066 (Key Save in the user File not work) closed by
- worksforme: Same for me - works ok […]
- 17:54 Ticket #2675 (reader-conax.c Paring) closed by
- fixed: Conax pairing already added to oscam.
- 17:44 Ticket #2170 (nagra card activation problem) closed by
- worksforme: I don't filter any EMMs for 1803 and G/S/UQ are correctly written to card.
- 17:07 Ticket #3084 (oscam.user disable caid) updated by
- to be a little bit more specific: we already have negative services - …
- 17:01 Ticket #1871 (Dvbapi Unsupported capmt.) closed by
- fixed
- 16:49 Ticket #3084 (oscam.user disable caid) closed by
- invalid
- 16:40 Ticket #3080 (AU is not going to ACTIVE modes) closed by
- worksforme: discuss in forum and post client and server config files (.conf …
- 16:36 Ticket #2148 (CCcam protocol maxdown violation problem) closed by
- fixed: No reply so seems to be fixed
- 16:13 Ticket #3079 (oscam does not create 'pid') updated by
- r8179 contains another enhancement, the ability to set pidfile name …
- 16:13 Ticket #3084 (oscam.user disable caid) created by
- Hello! oscam.user caid = !xxxx disable xxxx caid Please!
- 16:12 Changeset [8179] by
- Add -B command line parameter (set pidfile name). Using -B sets …
- 15:58 Ticket #3082 (Add the syslog facility) closed by
- fixed: Better solution than the proposed is implemented in r8178.
- 15:57 Changeset [8178] by
- Add -I command line parameter (set syslog ident). With -I user can …
- 15:57 Changeset [8177] by
- config/reader: Fix build error when WITH_LB is disabled.
- 15:46 Changeset [8176] by
- Added new parameter 'pidfile' to documentation.
- 15:44 Ticket #3043 (Case sensitive ecm.info) closed by
- fixed: Fixed by r8175. Now the only limitation for reader names is that …
- 15:41 Ticket #3083 (typo in module-camd35.c) closed by
- fixed: Fixed in r8173.
- 15:41 Changeset [8175] by
- config/reader: Convert reader config to use the generic parser. Now …
- 15:41 Changeset [8174] by
- webif: Prevent segfault when saving reader that do not exists.
- 15:39 Changeset [8173] by
- Fix minor typos in log messages. Fixes ticket #3083.
- 15:26 Ticket #3081 (Card lock) updated by
- @ ni_hao: I hope someone finally understands me. It looks like you …
- 15:26 Ticket #3080 (AU is not going to ACTIVE modes) reopened by
- having a look on my server shows me the same issue. AU does not switch …
- 14:52 Ticket #3083 (typo in module-camd35.c) updated by
- Not the only place... […]
- 14:43 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- Tell me how to give you more information to correct / add a filter EMM
- 14:40 Ticket #3083 (typo in module-camd35.c) created by
- = Revision all = Issue Description Just a small typo in …
- 14:28 Ticket #3082 (Add the syslog facility) updated by
- The facilities are the wrong approach because they are predefined. I …
- 14:01 Ticket #3082 (Add the syslog facility) updated by
- Hi, this is the first time I hear "The facilities are IMO very old …
- 12:29 Ticket #3082 (Add the syslog facility) updated by
- Why don't you filter by program name. It much-much is easier and we …
- 12:03 Ticket #3082 (Add the syslog facility) created by
- = Reason for enhancement Add the ability to change the hard coded …
- 10:59 Ticket #3079 (oscam does not create 'pid') closed by
- fixed: Commited in r8172. I'm thinking of adding also command line parameter …
- 10:58 Changeset [8172] by
- Add support for saving pid file. This adds new setting in [global] …
- 08:30 Ticket #3081 (Card lock) updated by
- Ubuntu 11.04 (GNU/Linux 2.6.38-8-generic-pae i686) [global] …
- 07:26 Ticket #3081 (Card lock) updated by
- Forget to mention, since you have x86_64, please also inform at forum …
- 06:50 Ticket #3081 (Card lock) closed by
- worksforme
- 06:50 Ticket #3081 (Card lock) updated by
- Here at all platforms (mipsel, i386/686, also x86_64 (ubuntu/suse) …
- 06:45 Ticket #3080 (AU is not going to ACTIVE modes) closed by
- worksforme: Using r8171 here at several different platforms, without changing …
- 04:49 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Sorry i cant use this on PC.
- 01:38 Ticket #3081 (Card lock) created by
- = Revision OSCAM 1.20-unstable_svn build r8171 = Issue Description If …
- 00:54 Ticket #3080 (AU is not going to ACTIVE modes) created by
- = Revision OSCAM 1.20-unstable_svn build r8171 = Issue …
- 00:34 Ticket #3066 (Key Save in the user File not work) updated by
- I can't reproduce this with r8171. I have opened "Files" tab in WebIf …
- 00:30 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Can you reproduce this on a PC? If you can then do this: […] post …
- 00:23 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- The problem with the filters are that for a long time the fact that …
- 00:20 Ticket #3043 (Case sensitive ecm.info) updated by
- I'll convert reader config to the new parser tomorrow and this ticket …
- 00:16 Ticket #3064 (debug level mask is not up to date in documentation) updated by
-
Owner changed
docman, can you please update this, I was told not to mess with … - 00:15 Ticket #3036 (Webif not have cert. value | Multiple web ports) closed by
- invalid: This report seems to be caused by user confusion and does not contain …
- 00:12 Ticket #3000 (When you save / edit the proxy reader I get a segfault) closed by
- worksforme
- 00:11 Ticket #2974 (ifd_phoenix.c [build 7982 and up]- ERROR: Could not read ...) updated by
- Any updates here? What does r7982 fix? Can we just revert it?
- 00:08 Ticket #2969 (Equidia 0500:043900 no sound) closed by
- fixed: This would be fixed by Admin's suggestion in comment:4.
- 00:06 Ticket #3035 (oscam stops working and also blocks the tunner of the box) updated by
- What box, what oscam config? How do you switch between 1.10 and …
- 00:02 Ticket #3024 (OSCAM shut down after SIGHUP signal) closed by
- fixed: […] Once we have pidfile (see ticket #3079) you can use […] …
01/23/13:
- 23:47 Ticket #3059 (Locking caid 0100:00006a) updated by
- This all is known already. What not known is how to fix / workaround …
- 22:40 Ticket #3059 (Locking caid 0100:00006a) updated by
- Cooldown Delay: 60 Cooldown Time: 600 is not the solution theparasol, …
- 20:15 Ticket #3079 (oscam does not create 'pid') updated by
- I know it can be done by an additional script. But oscam as a daemon …
- 16:59 Changeset [8171] by
- config/reader: Refactor parsing of "cooldown" and related settings. …
- 16:59 Changeset [8170] by
- config/reader: Refactor parsing of "ratelimitecm" and …
- 16:59 Changeset [8169] by
- config/reader: Refactor parsing of "auprovid" setting. Preparation …
- 16:14 Changeset [8168] by
- config/reader: Refactor parsing of "boxkey" setting. Preparation for …
- 16:14 Changeset [8167] by
- config/reader: Refactor parsing of "savenano" and "blocknano" …
- 16:14 Changeset [8166] by
- config/reader: Cleanup nano generation.
- 16:14 Changeset [8165] by
- config/reader: Refactor parsing of "blockemm-bylen" setting. …
- 16:13 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Well guys i cant provide fast logs without to use my primary …
- 16:13 Changeset [8164] by
- config/reader: Refactor parsing of "emmcache" setting. Preparation …
- 16:13 Changeset [8163] by
- config/reader: Refactor parsing of "group" setting. Preparation for …
- 16:13 Changeset [8162] by
- config/reader: Refactor parsing of "aeskeys" setting. Preparation for …
- 16:13 Changeset [8161] by
- config/reader: Refactor parsing of "class" setting. Preparation for …
- 16:13 Changeset [8160] by
- config/reader: Refactor parsing of "chid" setting. Preparation for …
- 16:13 Changeset [8159] by
- config/reader: Refactor parsing of "ident" setting. Preparation for …
- 16:13 Changeset [8158] by
- config/reader: Refactor parsing of "detect" setting. Preparation for …
- 16:13 Changeset [8157] by
- config/reader: Refactor parsing of "atr" setting. Preparation for …
- 16:13 Changeset [8156] by
- config/reader: Refactor parsing of "ins7e" and "ins7e11" settings. …
- 15:03 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- The defined emm filter for dre crypt are crappy. Your log shows an emm …
- 13:42 Ticket #3067 (multiple login) updated by
- can dev team make this uniq=0 but have option to limit the connection…
- 11:25 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- you say you disabled all cccam readers and then you post a log where …
- 08:00 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Here is the log i could get! I stopped the oscam immediately after CPU …
- 07:20 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Well i use "I think" because i cant test all 100 revisions that is …
01/22/13:
- 22:54 Ticket #3079 (oscam does not create 'pid') updated by
- Already discussed here: …
- 22:37 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- Sorry. I confirm that oscam ymodv18-t35 card tricolor center works, …
- 21:44 Changeset [8155] by
- New default value in documentation for 'inactivitytimeout'parameter, …
- 21:44 Changeset [8154] by
- New default value in documentation for 'inactivitytimeout'parameter.
- 20:42 Changeset [8153] by
- After answer 9011 - conax smart card need reset.
- 20:28 Ticket #3079 (oscam does not create 'pid') updated by
- You can create pid on startup CAMDIR="/usr/bin" CAM="oscam" # …
- 20:13 Ticket #3079 (oscam does not create 'pid') created by
- It is strange that oscam as a daemon does not save its own pid file. …
- 19:46 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- "I think" and no logs due to high cpu?! , even no reader configs no …
- 19:36 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- that means that from r7012 there is a problem at your side. In r7012 …
- 19:02 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Well i already tried it. It happens same. i was test with older …
- 17:43 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- Do log with d255 from ymod and send here.
- 17:40 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- OT: ymod is taking changes from oscam ... but if he changes something …
- 17:17 Ticket #3078 (DRECrypt EMMs not working at all) updated by
- Same hardware and software setup, but with oscam-ymod works fine.
- 17:14 Ticket #3078 (DRECrypt EMMs not working at all) created by
- = Revision 1.20-unstable_svn build r8152 = Issue Description oscam is …
- 16:13 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Then disable all cccam reader and test if phoenix reader make high cpu …
- 15:38 Ticket #3074 (Oscam high CPU when using phoenix) reopened by
- Well i am no talking for PC Linux. I am talking for Enigma 2 mipsel …
- 15:09 Changeset [8152] by
- config/reader: Refactor parsing of "blockemm-X" and "saveemm-X" …
- 15:09 Changeset [8151] by
- config/reader: Refactor parsing of "rsakey" setting. Preparation for …
- 15:09 Changeset [8150] by
- config/reader: Refactor parsing of "boxid" setting. Preparation for …
- 15:09 Changeset [8149] by
- config/reader: Refactor parsing of "caid" setting. Preparation for …
- 15:09 Changeset [8148] by
- config/reader: Refactor parsing of "cacheex_ecm_filter" setting. …
- 15:09 Changeset [8147] by
- config/reader: Refactor parsing of "services" setting. Preparation …
- 15:09 Changeset [8146] by
- config/reader: Refactor parsing of "key" setting. Preparation for …
- 11:46 Ticket #3048 (Blocker Problem with the config and DVBAPI) closed by
- fixed: r8145. Don't use this ticket for other/different problems, please.
- 11:44 Changeset [8145] by
- - fixed another provid problem - this fixes ticket #3048
- 11:28 Ticket #3075 (WebIf enhancement) updated by
- Well, I googled today for "OSCam execute script: no script defined" in …
- 11:23 Ticket #3077 (shorter loglines in logfile; better readability (ecmfmt)) created by
- = Reason for enhancement shorter loglines in logfile; better …
- 10:51 Ticket #3075 (WebIf enhancement) updated by
- Though you have really larger problems than only legal crawlers if you …
- 10:47 Ticket #3076 (WebIF small bug :)) closed by
- invalid: This is an IE-only "bug" and was already fixed last weekend...dont …
- 10:35 Ticket #3076 (WebIF small bug :)) updated by
- or this log: 2013/01/22 10:33:08 83BB3A8 c encrypted cccam-client …
- 10:32 Ticket #3076 (WebIF small bug :)) created by
- = Revision 8112 'Client' See log please: 2013/01/22 …
- 10:28 Changeset [8144] by
- cfg/reader: Remove cccam special cases for "inactivitytimeout" …
- 10:08 Ticket #3075 (WebIf enhancement) closed by
- fixed: Committed r8143.
- 10:08 Changeset [8143] by
- webif: Add robots.txt which prevents indexing of oscam's webif. This …
- 09:55 Ticket #3075 (WebIf enhancement) updated by
- Not a bad idea, I thought we already have that.
- 09:08 Ticket #3075 (WebIf enhancement) created by
- = Reason for enhancement Preventing crawlers to index OSCam webif = …
- 07:39 Ticket #3074 (Oscam high CPU when using phoenix) closed by
- worksforme
- 07:39 Ticket #3074 (Oscam high CPU when using phoenix) updated by
- Works here: 2 USB mouse readers attached with r8142 (SuSe distro). …
- 07:22 Ticket #3048 (Blocker Problem with the config and DVBAPI) updated by
- I was try the patch. From the short time i tried it it seems to work. …
- 07:21 Ticket #3074 (Oscam high CPU when using phoenix) created by
- = Revision 7011 - latest = Issue Description When i have attached …
01/21/13:
- 16:09 Ticket #3048 (Blocker Problem with the config and DVBAPI) updated by
- sure! at first chance i will try it and i'll report the result
- 07:23 Ticket #3073 (Warning: keyword 'cooldowndelay' in reader section not recognized ...) closed by
- fixed: Fixed in r8142.
- 07:22 Changeset [8142] by
- Revert "config/reader: Remove obsolete settings (cooldowndelay, …
- 00:18 Ticket #3073 (Warning: keyword 'cooldowndelay' in reader section not recognized ...) reopened by
- 00:17 Ticket #3073 (Warning: keyword 'cooldowndelay' in reader section not recognized ...) updated by
- I'm not crazy!!! This is my oscam.server: [reader] label …
- 00:00 Changeset [8141] by
- Tryfix2 CCcam timeouts tnx to basta2k - Squashed a little bug - …
Note:
See TracTimeline
for information about the timeline view.