Timeline
03/10/13:
- 22:36 Ticket #3228 (cwcycle_check_enable is not saved in config) updated by
-
Owner changed
- 21:32 Ticket #3228 (cwcycle_check_enable is not saved in config) created by
- = Revision 8519 = Issue Description cwcycle_check_enable is not saved …
- 20:58 OscamWhiteList edited by
- JSC Update (diff)
- 19:58 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Furthermore: When I look into this mgclient reporting mechanism to the …
- 19:11 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- granted, OSCam as newcamd reader doesnt know what CAIDs it gets, but …
- 19:02 Changeset [8531] by
- monitor: Move private monitor data out of struct s_client.
- 19:02 Changeset [8530] by
- monitor: Remove code that leaked and was doing nothing.
- 19:02 Changeset [8529] by
- monitor: Remove dead code in monitor_recv(). These allocations are …
- 19:02 Changeset [8528] by
- monitor: exit command should call cs_disconnect_client() instead of …
- 19:02 Changeset [8527] by
- monitor: Kill monitor clients along with normal clients on exit. …
- 18:58 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Well you can define it manually - but not by letting the server …
- 18:48 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Replying to Admin: > The option is called "mgclient". It …
- 18:37 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- The option mgclient is under the server section (also in WebIf) and …
- 18:20 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- hm, I am not sure I understand... I was under impression that …
- 18:16 Changeset [8526] by
- Prevent leaking of internal work_thread data. If some callback called …
- 18:16 Changeset [8525] by
- Reliably stop check() thread on exit. Use timed condition instead of …
- 18:16 Changeset [8524] by
- Reliably stop reader_check() thread on exit. Use timed condition …
- 17:44 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- I think it doesn't work in client mode, though it would be nice if it …
- 17:25 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- The option is called "mgclient". It should only work reliable with …
- 11:11 Ticket #3227 (WEBIF pages are generated even if webif is not selected to be compiled) closed by
- fixed: Fix commited in r8523.
- 11:11 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Yes I have tried connecting oscam to oscam & cccam to oscam. Only …
- 11:11 Changeset [8523] by
- build: Do not generate webif/pages.c if webif is not enabled. This …
- 11:02 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- @disisdavo are you seeing all caids on the client side as well with …
- 10:33 Ticket #3227 (WEBIF pages are generated even if webif is not selected to be compiled) created by
- WEBIF pages are generated even if webif is not selected to be …
- 04:27 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- ----- FIRST ----- I have found this its reporting correctly with the …
- 02:26 Ticket #3226 (ccckeepalive: reader reconnect needed) updated by
- For better explanation, the issue occurs when ccckeepalive=1 and cccam …
- 02:26 Changeset [8522] by
- monitor: Do not leak temporary buffers.
- 02:26 Changeset [8521] by
- Move aes keys to their own structure.
- 02:18 Ticket #3226 (ccckeepalive: reader reconnect needed) created by
- = Revision All = Issue Description If a "cccam ext" reader change his …
- 01:30 Changeset [8520] by
- monitor: Prevent crashes when monitor is fed with random data after login.
03/09/13:
- 18:46 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- looks like […] is working. will test connection later. i got some …
- 17:58 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- port = …
- 17:44 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- port = 3333@0602:000000,000000;0603:000000,000000,0604:000000 should …
- 17:34 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Please post different port settings so we can check if the algorithm …
- 17:29 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Looks ok to me,
- 17:28 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- brilliant ... should testing from another oscam installation be …
- 17:25 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Replying to amet: > Replying to gf: > > How …
- 17:17 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Replying to gf: > How does this sound: sounds like a …
- 17:13 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- Ignore the skipped and errors, the ones that are written is what counts.
- 17:12 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- ok, separating it with "," did the trick... now I see […] but …
- 17:12 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- We should see/decide what the correct syntax is and the if needed, fix …
- 15:12 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- @ gf: I think that the documentation is wrong. The syntax …
- 13:54 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- Replying to gf: > In other words if you want different …
- 13:31 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- I think we have bigger problems here. According to the documentation …
- 13:22 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) closed by
- fixed: thanks for commit gf. ticket is fixed
- 12:53 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- amet's problem is because at startup filters are checked port by port …
- 12:38 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- Only camd35 and newcamd code that checked blockemm. […]
- 11:39 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- I tested #8482, after comparing with actual trunk there is no …
- 09:50 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- can someone check the other protocols, like cccam and gbox for working …
- 09:15 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- UPDATE Even though its not showing all the CAIDs in the log …
- 08:22 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- yes i can confirm, in the log, only the first CAID is now being set. …
- 08:13 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) reopened by
- Still needs, work from last update, I didn't double check if all caids …
- 08:02 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- hm, not to interrupt but when I have […] I only have below in …
- 07:54 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) closed by
- fixed: Set to fixed, waiting adding to svn.
- 06:23 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- I unticked mgclient SAVED RESTARTED OSCAM All OK. I ticked mgclient …
- 06:08 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- compiling now...feedback to come, i had to svn update first..
- 04:19 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- @disisdavo: Ok that makes sense. The patch is applied in r8519.
- 04:18 Changeset [8519] by
- camd35/newcamd: saveemm should enable emm passthrough. If user …
- 03:53 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) updated by
- I tried to first discuss it on forums, but nobody paid attention. …
- 03:47 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) updated by
- > CLIENT: oscam dvbapi REV8297 here is the problem. oscam before …
- 03:02 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- Sorry for the chat here... BUT this is a good idea, sometimes you do …
- 02:56 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) updated by
-
Summary changed
- 02:46 Ticket #3225 (newcamd PORT= wrong when using mgclent =1) created by
- = Revision Current = Issue Description if you select mgclient = 1 …
- 02:46 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) updated by
- Cccam Protocol! CLIENT: oscam dvbapi REV8297 on SH4 Receiver Kathrein …
- 01:48 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) updated by
- What protocol, what client?
- 01:43 Changeset [8518] by
- oscam-client: Remove duplicated function. check_client() and …
- 01:43 Changeset [8517] by
- Remove three unused fields in struct s_client.
- 01:33 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) updated by
- From REV8441 to REV8453 it is working again! Since REV8354 AU is NOT …
- 01:19 Ticket #3224 (EMM Reassembling is not working for Viaccess HRT Card any more) created by
- = Revision 8376 = Issue Description EMM Reassembling is not working …
- 00:15 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- Ad: Maybe you're missing the fact that block + save will *still* …
- 00:08 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- You're missing nothing. But with current behavior it's simply not …
03/08/13:
- 23:50 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- Can you try version r8482 (the version before viaccess was converted). …
- 23:47 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) updated by
- Isn't it unexpected to pass EMMs when blockemm is enabled? Someone …
- 23:15 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- right, it worked before with "0" a few days ago and after all the …
- 21:36 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- @jan If you use acamd you must set 'emmreassembly = 0' coz acamd does …
- 21:07 Ticket #3223 (ewcamd/camd35: saveemm should enable emm passthrough) created by
- If user enables a particular saveemm category, the emm should be …
- 20:25 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) updated by
- have you tried: […] 1 = enable EMM reassembly, default There was …
- 18:05 Ticket #3222 (SRG via5 EMM no longer working in Trunk with Acamd and emmreassembly = 0) created by
- In actual trunk it looks like EMMs for Via5/SRG is no longer working. …
- 15:08 Ticket #3221 (irishmist) updated by
- I have 3 viaccess cards with 3 diffrent providers they all have the …
- 15:06 Ticket #3221 (irishmist) created by
- = Revision r 8990 to r 8516 = Issue Description running and tested in …
- 14:53 OscamWhiteList edited by
- (diff)
- 14:28 ECMLengthList edited by
- (diff)
- 14:23 ECMLengthList edited by
- (diff)
- 13:40 Ticket #3186 (serialreadertimeout does not seem to be used anywhere) closed by
- fixed: Fixed in r8516.
- 13:39 ECMLengthList edited by
- (diff)
- 13:33 ECMLengthList edited by
- (diff)
- 12:08 Changeset [8516] by
- Remove serialreadertimeout setting. It not used to set serial reader …
- 11:59 Ticket #3206 (serverip isn't used for all services) closed by
- fixed: Fixed in r8515.
- 11:41 Changeset [8515] by
- Honour global serverip setting. The idea behind serverip set in …
- 11:25 Changeset [8514] by
- csctapi/sc8in1: Convert to card reader private data. sc8in1 reader …
- 11:25 Changeset [8513] by
- csctapi/smart: Convert to card reader private data. Smart reader …
- 11:25 Changeset [8512] by
- csctapi/pcsc: Convert to card reader private data. Removes all pcsc …
- 09:55 Ticket #3213 (oscam webif let google chrome crash) updated by
- No problems here too, win7 x64. I am sure you have some plugin that …
- 09:24 Changeset [8511] by
- Fix wrong typos in documentation.
- 01:44 Changeset [8510] by
- nagra: Fix regression introduced in r8486. Converting to private data …
- 00:27 Ticket #3213 (oscam webif let google chrome crash) updated by
- we have windows 7 x64 machines
03/07/13:
- 22:25 Ticket #3220 (typo) created by
- typo in the docs. multiple lines with […] instead […] files: […]
- 20:17 Ticket #3213 (oscam webif let google chrome crash) updated by
- Using Chrome Version 25.0.1364.152 on Mac OS No problems at all!
- 19:48 CardsList edited by
- (diff)
- 18:53 Ticket #3218 (emmreassembly default is wrong documented) reopened by
- @docman: The default value is now right, but the description is not. …
- 18:40 Changeset [8509] by
- Added documentation for new parameter 'cwcycle_sensitive'.
- 18:30 Ticket #3218 (emmreassembly default is wrong documented) closed by
- fixed
- 18:25 Changeset [8508] by
- Wrong default value for 'emmreassembly' in documentation.
- 18:14 Ticket #3219 (cccam-reader srvid blocked for one minute on rejected request) created by
- = Revision r8507 = Issue Description I'm not a developer, merely a …
- 14:22 Ticket #3213 (oscam webif let google chrome crash) updated by
- still having the problem and on another pc the problem exists too now …
- 12:44 Changeset [8507] by
- csctapi/stapi: Convert to card reader private data. Now that we have …
- 12:44 Changeset [8506] by
- csctapi/cool: Convert to card reader private data. Cool reader …
- 12:44 Changeset [8505] by
- Introduce infrastructure for card reader private data. This would …
- 12:25 Changeset [8504] by
- Remove harmless warnings. When WEBIF, MONITOR, CAMD33, NEWCAMD, …
- 02:53 Ticket #3201 (Card reader Error - Nagra3 - 142) updated by
- can someone help?
- 02:52 Ticket #3201 (Card reader Error - Nagra3 - 142) updated by
-
Cc, Owner, Status changed
- 02:13 Changeset [8503] by
- Move availkeys from struct s_reader to private reader strucure. This …
- 02:13 Changeset [8502] by
- Remove pcsc variables in struct s_config when the reader is not …
- 02:13 Changeset [8501] by
- Remove two unused fields from struct s_reader. l_pwd is not used …
03/06/13:
- 21:51 Ticket #3218 (emmreassembly default is wrong documented) updated by
- @gf - my reply was to The_Raven, not to you. he was asking about …
- 20:38 HeaderWhitelist edited by
- (diff)
- 18:48 Ticket #3218 (emmreassembly default is wrong documented) updated by
- @The_Raven: No, oscam -> oscam of course works. See r8454. @Deas: …
- 18:34 Ticket #3218 (emmreassembly default is wrong documented) updated by
- Replying to The_Raven: > It must be disabled (0) in case …
- 18:12 Ticket #3218 (emmreassembly default is wrong documented) updated by
- Default is enabled? So if i use oscam -> oscam i need to disable it? …
- 14:51 HeaderWhitelist edited by
- (diff)
- 14:48 HeaderWhitelist edited by
- (diff)
- 13:44 Ticket #3218 (emmreassembly default is wrong documented) updated by
- Correct, by default EMM reassemblation in oscam is enabled (1). It …
- 13:39 Changeset [8500] by
- dvbapi/mca: Prevent build warning. This fixes the following warnings …
- 13:39 Changeset [8499] by
- gbox: Do not use static initializers for mutexes and conds. Some …
- 13:27 Changeset [8498] by
- gc: Stop garbage_thread realiably on exit.
- 13:27 Changeset [8497] by
- Free first_client on exit.
- 13:27 Changeset [8496] by
- config/global: Free newcamd and cs378x port settings using free_data() …
- 13:27 Changeset [8495] by
- config/global: Free struct s_ip cfg settings on exit.
- 13:27 Changeset [8494] by
- config: Introduce free_value() callback per value. This allows config …
- 10:47 Ticket #3218 (emmreassembly default is wrong documented) created by
- The Default-Parameter for emmreassembly is "1" instead "0", - see the …
- 08:25 Changeset [8493] by
- Added documentation for new parameter 'emmreassembly'.
- 08:21 Ticket #3217 (cant use Infinity anymore) closed by
- worksforme: http://www.streamboard.tv/oscam/changeset/8033 …
- 07:33 Changeset [8492] by
- Added documentation for new parameter 'srvidholdseconds'.
- 07:25 Changeset [8491] by
- Added documentation for new parameter 'ecmunique'.
- 03:32 Changeset [8490] by
- static variables are reset to zero on start, no need to init them …
- 03:07 Changeset [8489] by
- Declare variables static where needed. Global variables that are used …
- 01:32 Changeset [8488] by
- irdeto: Use private card system data. This commit should not …
- 01:32 Changeset [8487] by
- cryptoworks: Use private card system data. This commit should not …
- 01:32 Changeset [8486] by
- nagra: Use private card system data. This commit should not introduce …
- 01:32 Changeset [8485] by
- dre: Use private card system data. This commit should not introduce …
- 01:32 Changeset [8484] by
- videoguard: Use private card system data. This commit should not …
- 01:32 Changeset [8483] by
- viaccess: Use private card system data. This commit should not …
Note:
See TracTimeline
for information about the timeline view.