[[PageOutline]] = Cardreader = == Why this Wiki page ? == I needed a reader that works on all linux platform as well as Mac OS X. So I chose to use a [http://www.ftdichip.com/Products/EvaluationKits/MM232R.htm FTDI MM232R module] as it fits these requirements and also works on Windows. I used Eagle to create the schema and the board and you can found all the files attached to this page (eagle files and images). == Eagle schematics : == [[Image(cardreader.png, 50%)]] == Eagle board : == [[Image(cardreader_board.png)]] == Some comments : == I would recommend using a support for the oscillator so that you can easily change it (I used a 3.58MHz one and a 6MHz one for testing). I didn't include any LED or anything that was not absolutely needed. JP1 allows you to select between 5V and 3.3V operation, this can be useful for cards that needs a 3V power supply instead of 5V. If you use 3.3V you will need to find an oscillator that runs at 3.3V In your [reader] section in oscam.server, you need to set the detect to : Detect = CTS