Version 5 (modified by 11 years ago) ( diff ) | ,
---|
Trac Ticket Queries
Table of Contents
In addition to reports, Trac provides support for custom ticket queries, used to display lists of tickets meeting a specified set of criteria.
To configure and execute a custom query, switch to the View Tickets module from the navigation bar, and select the Custom Query link.
Filters
When you first go to the query page the default filter will display tickets relevant to you:
- If logged in then all open tickets it will display open tickets assigned to you.
- If not logged in but you have specified a name or email address in the preferences then it will display all open tickets where your email (or name if email not defined) is in the CC list.
- If not logged and no name/email defined in the preferences then all open issues are displayed.
Current filters can be removed by clicking the button to the left with the minus sign on the label. New filters are added from the pulldown lists at the bottom corners of the filters box ('And' conditions on the left, 'Or' conditions on the right). Filters with either a text box or a pulldown menu of options can be added multiple times to perform an or of the criteria.
You can use the fields just below the filters box to group the results based on a field, or display the full description for each ticket.
Once you've edited your filters click the Update button to refresh your results.
Navigating Tickets
Clicking on one of the query results will take you to that ticket. You can navigate through the results by clicking the Next Ticket or Previous Ticket links just below the main menu bar, or click the Back to Query link to return to the query page.
You can safely edit any of the tickets and continue to navigate through the results using the Next/Previous/Back to Query links after saving your results. When you return to the query any tickets which were edited will be displayed with italicized text. If one of the tickets was edited such that it no longer matches the query criteria the text will also be greyed. Lastly, if a new ticket matching the query criteria has been created, it will be shown in bold.
The query results can be refreshed and cleared of these status indicators by clicking the Update button again.
Saving Queries
Trac allows you to save the query as a named query accessible from the reports module. To save a query ensure that you have Updated the view and then click the Save query button displayed beneath the results. You can also save references to queries in Wiki content, as described below.
Note: one way to easily build queries like the ones below, you can build and test the queries in the Custom report module and when ready - click Save query. This will build the query string for you. All you need to do is remove the extra line breaks.
Note: you must have the REPORT_CREATE permission in order to save queries to the list of default reports. The Save query button will only appear if you are logged in as a user that has been granted this permission. If your account does not have permission to create reports, you can still use the methods below to save a query.
Using TracLinks
You may want to save some queries so that you can come back to them later. You can do this by making a link to the query from any Wiki page.
[query:status=new|assigned|reopened&version=1.0 Active tickets against 1.0]
Which is displayed as:
This uses a very simple query language to specify the criteria (see Query Language).
Alternatively, you can copy the query string of a query and paste that into the Wiki link, including the leading ?
character:
[query:?status=new&status=assigned&status=reopened&group=owner Assigned tickets by owner]
Which is displayed as:
Using the [[TicketQuery]]
Macro
The TicketQuery macro lets you display lists of tickets matching certain criteria anywhere you can use WikiFormatting.
Example:
[[TicketQuery(version=0.6|0.7&resolution=duplicate)]]
This is displayed as:
- #11
- Support for Platforma HD for DRECrypt
- #31
- NDS SKY-IT 093B
- #41
- sky it
- #48
- HD+ Support
- #51
- sky italy ecm still problem
- #76
- PC/SC support ?
- #77
- pcsc Omnikey 3121 USB reader
- #85
- Patch proposal to Smartreader protocol
- #94
- OSCAM ECM slow
- #103
- NAGRA3 ZON CARD 1802:0000
- #112
- Error compile 578 SVN SlugOS 4.8
- #114
- Warning when building 591svn
- #130
- svn 678 error compiling cygwin
- #148
- build 721 working good and stable with nagra3 caid=1802, timmings between 320-340.. getting good. thank you so much.
- #166
- Smargo+ reader got wrong ATR from card
- #169
- possible to have web interface like newcs?
- #194
- May you add others Monitor options/commands?
- #209
- Smargo + 093b card system not supported, Please implement Smargo support again
- #214
- Smargo+ reader got CW:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- #218
- Sky italia oscam ppc svn842 --------- svn858 not works
- #220
- OScam tivusat
- #225
- Revison from 866 problem !!!
- #226
- Sly Italia 093b - i686 - Not Working - r02 error
- #237
- SkyIT 0919 and PTS failure
- #239
- SRG Suisse Viaccess 2.6 does not work
- #240
- Oscam tivusat ?
- #243
- Oscam svn924 ----925-----928 not works sky italia in dreambox, only svn918 works fine
- #275
- Multiple servers balance
- #286
- In new version after .0952 Sky Italy (0919 Card), Not Works.
- #295
- About new oscam doesnt work
- #329
- Not found ECM on Nagra cards TvCabo Rom142
- #392
- Card P3 NDS GL54
- #429
- reader-videoguard2.c [1714] does not compile cleanly on armel (ok on x86)
- #449
- Oscam / CCcam crashes (093b)
- #455
- asiasat3s star package card reading failed in oscam
- #458
- DreCrypt Platforma HD v15 Card gets not updated
- #483
- Pls add feature for OSCAM with DVB-API for mips-sigma (azbox)
- #504
- OScam crashes after newcamd clients logout (or maybe timeout)
- #533
- unknown user with build 2352
- #556
- Version 2445 and later Compiler Error
- #570
- #2490 irdeto issue
- #571
- old date in entitlement
- #610
- Newcamd remote reader not working
- #614
- Newcamd server with cards with the same CAID and PROVID
- #617
- Newcamd server with same cards CAID and PROVID in oscam and newcamd
- #651
- WebIf: fix for saving reader rsakey not working!
- #673
- DNS resolving
- #689
- Resolver Thread is started even with clientdyndns = 0
- #696
- master deadlock: udp-socket
- #700
- PANIC: master deadlock! last location: event: udp-socket
- #702
- Error building #2916 (ppc)
- #705
- ecm reset counter???????
- #713
- Support for Dahlia Card (CAID: 0662 ACS V5.7)
- #728
- PANIC: Cannot fork() (errno=12)
- #736
- CCcam not reconnecting after going idle
- #775
- Videoguard1 ND1 0988 to test Logs Please rorothetroll help
- #776
- Videoguard1 ND1 0988 to test Logs Please rorothetroll help
- #780
- I have this card NDS Ono Spain 0915.
- #783
- NDS1 0988 for SVN3027 -d 255 log
- #790
- Videoguard1 NDS1 0988 SVN 3034 LOGS
- #793
- Videoguard1 NDS1 0988 SVN3035 -D 255 LOGS
- #794
- 3035 NDS1 0988 LOG
- #804
- nds1 099c build #3040 oscam.log
- #811
- Why the SVN3050 NDS1 card system still not supported? NDS1 0988 ?
- #840
- not parameter DOUBLE_CHECK in CMakeLists.txt
- #852
- 3156 error compiling on debian5
- #853
- error on build 3157
- #865
- waitforcards=1 don't work after version 3152
- #867
- waitforcards=1 don't work after version 3152
- #888
- Oscam crahes if user is diconnected
- #899
- oscam-svn3242
- #930
- waitforcards doesnt work on trunk version
- #932
- compile warnings
- #962
- config.sh: if disable debug = error on module-dvbapi.c
- #973
- DVBAPI PID error since 3316 (variable problem!) please fix :)
- #981
- DVBAPI not working in 3353
- #984
- DVBAPI Process not running
- #1008
- Crash on "read from pipe"
- #1009
- Disabling a user is not working with threaded OSCam
- #1026
- Oscam tag build #3146 - master deadlock
- #1038
- pcsc under windows not work
- #1054
- Dvbapi not working PPC SVN3526
- #1090
- oscam 3610 nds1 cdid:0988 LOG
- #1102
- OSCA R3610 NDS1 VideoGuard China (0988) LOG
- #1106
- Oscam crash with CSP
- #1108
- Oscam crash on Fritzbox (7270 v2)
- #1109
- build #3631
- #1120
- OSCAM R3658 NDS1 VideoGuard China (0988) LOG
- #1125
- segmentation fault
- #1132
- Segmentation fault with pcsc
- #1133
- build segment fault
- #1158
- Does not work with serial port connected users on serial port .
- #1161
- dvbapi mips stop decoding with AU
- #1168
- entitlement date for irdeto 0602 (NLD, Ziggo) not correct
- #1223
- Read nano from file not working - svn build #3846
- #1236
- classD0 ins40: (-2) status not ok 09 dc
- #1247
- error compile rev 3901
- #1261
- sssp source code from my reciver want to add in oscam as a reader
- #1269
- Patch emm support for SRG/SSR (0500:040810)
- #1270
- EMM Problems with NEW SRG Card 0500:040810 (via3??)
- #1278
- oscam Cannot create pipe (errno=24)
- #1289
- newcamd new IDs patch (fixed/alone)
- #1296
- Broken CCCam proxy with WebIf
- #1299
- compile errror
- #1304
- oscam > 3100 more pcsc readers not work
- #1306
- #3981 Build Error
- #1312
- error building #3995 for ppc into rc6.o
- #1316
- TNTSAT ->card system not supported
- #1336
- Card TNTSAT not work
- #1337
- Card system not supported (Irdeto [Skylink] CAID:0624)
- #1342
- compile error sh4 on ubuntu with build 4067
- #1372
- build error icc_async.c - error: #if with no expression
- #1377
- High CPU Usage 4158
- #1384
- lost TongFang Card with pcsc reader support since #4181
- #1429
- hi i have d-samrt 42E car
- #1482
- start oscam few min crash
- #1539
- Nagra/Tiger Purchace
- #1541
- svn 4558 ecm time (ltime) not showing in webif
- #1542
- svn 4558 ecm time (ltime) not showing in webif
- #1543
- svn 4558 ecm time (ltime) not showing in webif
- #1557
- new nano Tnt
- #1580
- SRR VIA Card 0500:023800 no longer working in TRUNK
- #1597
- 2x tbsdtv reader (USB Phoenix&SmartMouse) TBS-3102V13
- #1610
- QboxHD(-MINI) OSCam r4670
- #1611
- Oscam going in error when my 2 boxes uses the same channel. Cache-problem
- #1619
- 09CD:000 not recognized
- #1637
- Reinit User DB Log
- #1674
- webif crash
- #1675
- CCcam clients are not getting anycard using oscam as server.
- #1731
- Errors on compile oscam whit mac intel
- #1752
- Oscam don't start on PPC (dbox2) @ Build 4947 & later
- #1754
- OSCAM and DM 500s
- #1766
- Changes introduced in 4963 generates very high CPU usage
- #1792
- oscam 5025 give locals cards only after reboot client-emulator
- #1797
- Total TV Card not working after firmware update form provider
- #1804
- Oscam as CCcam Server not working since Build 5053
- #1805
- Overclocking in smartreader doesn't work anymore
- #1844
- Negative service (!) in cccam reader gerenates many many local
- #1866
- All new oscam not run amiko sh4 Spark! (enigma2 good)
- #1881
- Irdeto Provider 0650 not supported
- #1890
- compile broken
- #1898
- BUG !Services in readers generates 10-20 locals from 5135 to 5333 Reshare Cards+Services
- #1900
- Readers not detected (/dev/sci0 or 1) after disable it or after crash.
- #1913
- Compile error
- #1921
- box freez
- #1922
- box freez
- #1923
- box freez
- #1928
- emm for csat 0500:32830 with cccam
- #1946
- AU don't works with SRG 0500:023800 with N-Line per CCcam
- #2009
- srg_emm.log 023800 + 040810
- #2057
- Reader stop working after some time
- #2075
- Sky Brazil GL54 card not supported
- #2107
- DVBapi no suport RAI card Seca1
- #2108
- GL54 not support
- #2113
- rev #5866 breaks GLOBAL entitlements for CCcam
- #2124
- 57xx , 58xx , 5929 not CLIENT KILLED so wan Cccam client can not refind online status
- #2183
- pls add a new read for CTI_CAS(Beijing Compunicate Technology inc )
- #2185
- Emm send Via webinterface
- #2205
- Changeset [6033] # anticasc
- #2206
- Changeset [6033] # anticasc
- #2259
- (Build-Error)
- #2271
- Compilation error
- #2272
- SSL error during compile rev. 6154
- #2277
- Build Error 6162
- #2279
- Build error 6162
- #2311
- Irdeto 2 EMM's always fails for CAID 0622
- #2321
- cccam client disconnect
- #2325
- 6234
- #2326
- 6234 NEEDINIT (no entitlements) readers
- #2372
- 6319 build error
- #2377
- AZBox build error
- #2444
- compile error
- #2452
- Multiplication of cards on CCcam clients on HOP2
- #2504
- userconfig.html crashes oscam
- #2508
- oscam tells me 2 login with an account that is at every restart of the client increases
- #2514
- Error Compiling r6647 on mips-wrt54g-linux.
- #2551
- OSCAM CAN NOT READ SKY UK CARD(noEntitlements)
- #2552
- Compile error after 6802
- #2556
- JSC Viaccess=card system not supported - ERROR in IO_Serial_Read (errno=0 Success) rev6829
- #2575
- Bug in globals.h with oscam.whitelist, mapping not workable for 32 Bit ProvID, 16 Bit OK, Potential Buffer issue
- #2601
- argolis triple reader: ioctl error in card detection
- #2610
- load balance mode 2
- #2625
- cscrypt crash since #7153
- #2642
- card system not supported
- #2667
- #7230 Internal cardreader NEEDINIT (no entitlements)
- #2680
- 099c card system not supported
- #2726
- Build does not work anymore
- #2731
- appendchaninfo = 1 not working anymore
- #2732
- Give priority to users in case of ratelimitecm active
- #2746
- oscam process die or not responde to sighup sigusr2
- #2747
- oscam process die or not responde to sighup sigusr2
- #2767
- Debian x64 oscam crashes when saving EcmHeaderWhitelist
- #2773
- 099c card system not supported
- #2789
- touch-interface: uriok-check always fails with apache mod_proxy
- #2790
- touch-interface: uriok-check always fails with apache mod_proxy
- #2791
- touch-interface: uriok-check always fails with apache mod_proxy
- #2792
- touch-interface: uriok-check always fails with apache mod_proxy
- #2805
- oscam can't read irdeto2 card on xtrend internal cardreader
- #2816
- dvbapi broken
- #2830
- on channel time not stop if user is inactive
- #2870
- error pcsc
- #2872
- Oscam 7752 (oe 2.0 mipsel) - Stop after 1 Second
- #2895
- Nagra card initialisation error
- #2897
- Failure to activate card
- #2898
- Failure to activate card
- #2901
- Ecm too high with nagra card and easymouse 2
- #2917
- oscam stop when using kill -1 `pidof oscam` to reload user file
- #2968
- Oscam last versions for mips-tuxbox-oe1.6 without support for INTERNAL reader
- #2972
- internal cardreader not working version oscam-svn7938
- #2977
- Conax.c New Algo Paring Beta Test
- #3007
- 4AF3 card system not supported (china cable)
- #3021
- Sky Brazil GL54 Card not supported.
- #3039
- new defect
- #3047
- Status of reader: OFF (1 entitlement)
- #3060
- 8112 Interferes with Cache-EX
- #3069
- no picture in tongfang 4A02
- #3072
- Warning: keyword 'protocol' in reader section not recognized Warning: keyword 'device' in reader section not recognized Warning: keyword 'protocol' in reader section not recognized Warning: keyword 'device' in reader section not recognized Warning: keyword 'ecmwhitelist' in reader section not recognized Warning: keyword 'ecmheaderwhitelist' in reader section not recognized Warning: keyword 'protocol' in reader section not recognized Warning: keyword 'device' in reader section not recognized Warning: keyword 'ecmwhitelist' in reader section not recognized Warning: keyword 'ecmheaderwhitelist' in reader section not recognized Warning: keyword 'protocol' in reader section not recognized Warning: keyword 'device' in reader section not recognized Warning: keyword 'ecmwhitelist' in reader section not recognized Warning: keyword 'ecmheaderwhitelist' in reader section not recognized Warning: keyword 'cooldowndelay' in reader section not recognized Warning: keyword 'cooldowntime' in reader section not recognized
- #3106
- compile error message on #8222
- #3115
- OSCAM crash when ratelimitecm is hit with dvbavi enabled
- #3245
- Increase default value of "hideclient_to" parameter
- #3310
- reopen after time lbreopenmode=0 ist broken
- #3389
- implementation of the "ratelimiter" for a proxy reader
- #3400
- Add some physical reader options to other readers as well
- #3474
- Issue with smargo and nagra card compatability in oscam versions
- #3485
- new ATR NDS Caid 0910
- #3499
- HD Austria problem-0648
- #3514
- ecm nok only for sky cinema 1 hd and calcio1 hd
- #3544
- 0B00 new card
- #3550
- Prefer local cards issue
- #3632
- NDS 2 tests help
- #3641
- New NDS CARD CAID 0959
- #3646
- Add new NDS Videoguard2 provider
- #3665
- New NDS Videoguard provider in Brazil - 0959
- #3714
- Make for Android
- #3760
- V2 smargo oscam pc server
- #3761
- oscam-1.20-unstable_svn-r9760 --i486-linux-gnu-libusb-pcsc
- #3765
- aeskey parse error on webif
- #3769
- Problem --V2 smartreader/oscam-1.20-unstable_svn-r9768 Compiler/ i486-linux-gnu-libusb-pcsc
- #3770
- Problem --V2 smartreader/oscam-1.20-unstable_svn-r9769 Compiler/ i486-linux-gnu-libusb-pcsc
- #3774
- V2 smartreader/ oscam-1.20-unstable_svn-r9772/i486-linux-gnu-libusb-pcsc
- #3886
- Seca card don't init
- #3981
- Latest builds of oscam generate err CW
- #3997
- no card init NDS v13 09c4 with smartreader
- #4012
- Build error in rev. 10032
- #4013
- Build error in 10032
- #4124
- can't decode, every ecm results in (invalid caid 0x0xxx) (xxx=caid)
- #4221
- Auto find conf dir
- #4268
- oscam sh4 stapi5 The new versions when stop oscam need to press 2 times on the stop button...
- #4299
- do not go EMM with the card Skylink ICE
- #4319
- compile Problem in r11025
- #4361
- Wrong SSLv3 description in webif
- #4430
- 032920,032940 ECM size Problem
- #4443
- Problematische Verbindungsversuche zu NET-Readern
- #4679
- Please merge this file to trunk (Fix some issues with caid 0650 acs 6.9 )
- #4680
- Demux not reused when using dvbapi
- #4696
- not able to make customized oscam bins
- #4811
- build warning 11608
- #4819
- /usr/bin/ld: reader-nagracak7.c:(.text+0x111c): undefined reference to `MDC2_Update'
- #4844
- Astra cesbo newcamd client get rejected group no matching reader
- #4848
- Doublecheck caids:
Just like the query: wiki links, the parameter of this macro expects a query string formatted according to the rules of the simple ticket query language. This also allows displaying the link and description of a single ticket:
[[TicketQuery(id=123)]]
This is displayed as:
- #123
- Error compile smartreader branch SVN637
A more compact representation without the ticket summaries is also available:
[[TicketQuery(version=0.6|0.7&resolution=duplicate, compact)]]
This is displayed as:
#11, #31, #41, #48, #51, #76, #77, #85, #94, #103, #112, #114, #130, #148, #166, #169, #194, #209, #214, #218, #220, #225, #226, #237, #239, #240, #243, #275, #286, #295, #329, #392, #429, #449, #455, #458, #483, #504, #533, #556, #570, #571, #610, #614, #617, #651, #673, #689, #696, #700, #702, #705, #713, #728, #736, #775, #776, #780, #783, #790, #793, #794, #804, #811, #840, #852, #853, #865, #867, #888, #899, #930, #932, #962, #973, #981, #984, #1008, #1009, #1026, #1038, #1054, #1090, #1102, #1106, #1108, #1109, #1120, #1125, #1132, #1133, #1158, #1161, #1168, #1223, #1236, #1247, #1261, #1269, #1270, #1278, #1289, #1296, #1299, #1304, #1306, #1312, #1316, #1336, #1337, #1342, #1372, #1377, #1384, #1429, #1482, #1539, #1541, #1542, #1543, #1557, #1580, #1597, #1610, #1611, #1619, #1637, #1674, #1675, #1731, #1752, #1754, #1766, #1792, #1797, #1804, #1805, #1844, #1866, #1881, #1890, #1898, #1900, #1913, #1921, #1922, #1923, #1928, #1946, #2009, #2057, #2075, #2107, #2108, #2113, #2124, #2183, #2185, #2205, #2206, #2259, #2271, #2272, #2277, #2279, #2311, #2321, #2325, #2326, #2372, #2377, #2444, #2452, #2504, #2508, #2514, #2551, #2552, #2556, #2575, #2601, #2610, #2625, #2642, #2667, #2680, #2726, #2731, #2732, #2746, #2747, #2767, #2773, #2789, #2790, #2791, #2792, #2805, #2816, #2830, #2870, #2872, #2895, #2897, #2898, #2901, #2917, #2968, #2972, #2977, #3007, #3021, #3039, #3047, #3060, #3069, #3072, #3106, #3115, #3245, #3310, #3389, #3400, #3474, #3485, #3499, #3514, #3544, #3550, #3632, #3641, #3646, #3665, #3714, #3760, #3761, #3765, #3769, #3770, #3774, #3886, #3981, #3997, #4012, #4013, #4124, #4221, #4268, #4299, #4319, #4361, #4430, #4443, #4679, #4680, #4696, #4811, #4819, #4844, #4848
Finally, if you wish to receive only the number of defects that match the query, use the count
parameter.
[[TicketQuery(version=0.6|0.7&resolution=duplicate, count)]]
This is displayed as:
Customizing the table format
You can also customize the columns displayed in the table format (format=table) by using col=<field> - you can specify multiple fields and what order they are displayed by placing pipes (|
) between the columns like below:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter)]]
This is displayed as:
Results (1 - 3 of 4825)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#4919 | fixed | Reduce binary size with CAK7 | ||
#4918 | fixed | Compile warning with cmake since 11743 at reader-viaccess | ||
#4917 | fixed | Activate HD+ card (04) in rev 11741 |
Full rows
In table format you can also have full rows by using rows=<field> like below:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter,rows=description)]]
This is displayed as:
Results (1 - 3 of 4825)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#4919 | fixed | Reduce binary size with CAK7 | ||
Description |
Reason for enhancementDo not include AES constants in binaries twice - instead of sharing them, fast_aes.c introduces the same constants. Possible impacts on other featuresNone Patch is in attachment |
|||
#4918 | fixed | Compile warning with cmake since 11743 at reader-viaccess | ||
Description |
Revision11743 Issue Description[ 35%] Building C object CMakeFiles/csreaders.dir/reader-dre.c.o [ 36%] Building C object CMakeFiles/csreaders.dir/reader-griffin.c.o [ 37%] Building C object CMakeFiles/csreaders.dir/reader-irdeto.c.o [ 38%] Building C object CMakeFiles/csreaders.dir/reader-nagra-common.c.o [ 38%] Building C object CMakeFiles/csreaders.dir/reader-nagra.c.o [ 39%] Building C object CMakeFiles/csreaders.dir/reader-nagracak7.c.o [ 40%] Building C object CMakeFiles/csreaders.dir/reader-seca.c.o [ 40%] Building C object CMakeFiles/csreaders.dir/reader-tongfang.c.o [ 41%] Building C object CMakeFiles/csreaders.dir/reader-viaccess.c.o /home/gabberhead/oscam-host/reader-viaccess.c: In function ‘MakeSubKeys’: /home/gabberhead/oscam-host/reader-viaccess.c:119:18: warning: ‘w[0]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/home/gabberhead/oscam-host/reader-viaccess.c:119:27: warning: ‘w[3]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/home/gabberhead/oscam-host/reader-viaccess.c:119:45: warning: ‘w[7]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/home/gabberhead/oscam-host/reader-viaccess.c:119:36: warning: ‘w[5]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
[ 42%] Building C object CMakeFiles/csreaders.dir/reader-videoguard-common.c.o [ 43%] Building C object CMakeFiles/csreaders.dir/reader-videoguard1.c.o [ 43%] Building C object CMakeFiles/csreaders.dir/reader-videoguard12.c.o [ 44%] Building C object CMakeFiles/csreaders.dir/reader-videoguard2.c.o [ 45%] Linking C static library libcsreaders.a [ 45%] Built target csreaders Scanning dependencies of target svnversion-log [ 45%] Built target svnversion-log Scanning dependencies of target csoscam When the issue occursCompiling with cmake on Debian 11 x64 Cross compiling on same Maschine with arm and mipsel toolchains, there are no warnings |
|||
#4917 | fixed | Activate HD+ card (04) in rev 11741 | ||
Description |
Revision11741 Issue Description2024/03/10 14:42:43 075AA297 r (reader) HD+ [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368) 2024/03/10 14:42:44 075AA297 r (reader) HD+ [mouse] card detected 2024/03/10 14:42:45 075AA297 r (reader) HD+ [mouse] ATR: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 2024/03/10 14:42:45 075AA297 r (reader) HD+ [mouse] Setting baudrate to 115200 bps 2024/03/10 14:42:45 075AA297 r (reader) HD+ [mouse] detected card in CAK7 mode 2024/03/10 14:42:45 075AA297 r (reader) HD+ [mouse] Initial AES: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 2024/03/10 14:42:46 075AA297 r (reader) HD+ [mouse] Rom revision: DNASP420 RevS60 2024/03/10 14:42:46 075AA297 r (reader) HD+ [mouse] no key3588 defined 2024/03/10 14:42:46 075AA297 r (reader) HD+ [mouse] card system not supported 2024/03/10 14:42:46 075AA297 r (reader) HD+ [mouse] Normal mode failed, reverting to Deprecated Mode 2024/03/10 14:42:48 075AA297 r (reader) HD+ [mouse] ATR: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 2024/03/10 14:42:51 075AA297 r (reader) HD+ [mouse] Warning: Card returned error on setting ifsd value to 251 2024/03/10 14:42:51 075AA297 r (reader) HD+ [mouse] detected card in CAK7 mode 2024/03/10 14:42:51 075AA297 r (reader) HD+ [mouse] Initial AES: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 2024/03/10 14:42:52 075AA297 r (reader) HD+ [mouse] Rom revision: DNASP420 RevS60 2024/03/10 14:42:52 075AA297 r (reader) HD+ [mouse] no key3588 defined 2024/03/10 14:42:52 075AA297 r (reader) HD+ [mouse] card system not supported 2024/03/10 14:42:52 075AA297 r (reader) HD+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1 2024/03/10 14:42:52 075AA297 r (reader) HD+ [mouse] card initializing error When the issue occurs<Please fill in> How the issue is reproducableafter cardreader start |
Query Language
query:
TracLinks and the [[TicketQuery]]
macro both use a mini “query language” for specifying query filters. Basically, the filters are separated by ampersands (&
). Each filter then consists of the ticket field name, an operator, and one or more values. More than one value are separated by a pipe (|
), meaning that the filter matches any of the values. To include a literal &
or |
in a value, escape the character with a backslash (\
).
The available operators are:
= | the field content exactly matches one of the values |
~= | the field content contains one or more of the values |
^= | the field content starts with one of the values |
$= | the field content ends with one of the values |
All of these operators can also be negated:
!= | the field content matches none of the values |
!~= | the field content does not contain any of the values |
!^= | the field content does not start with any of the values |
!$= | the field content does not end with any of the values |
The date fields created
and modified
can be constrained by using the =
operator and specifying a value containing two dates separated by two dots (..
). Either end of the date range can be left empty, meaning that the corresponding end of the range is open. The date parser understands a few natural date specifications like "3 weeks ago", "last month" and "now", as well as Bugzilla-style date specifications like "1d", "2w", "3m" or "4y" for 1 day, 2 weeks, 3 months and 4 years, respectively. Spaces in date specifications can be left out to avoid having to quote the query string.
created=2007-01-01..2008-01-01 | query tickets created in 2007 |
created=lastmonth..thismonth | query tickets created during the previous month |
modified=1weekago.. | query tickets that have been modified in the last week |
modified=..30daysago | query tickets that have been inactive for the last 30 days |
See also: TracTickets, TracReports, TracGuide